Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
01-24-2002, 05:47 AM
|
#1 |
|
Registered Member
Join Date: Aug 2001
Location: Louisville, KY, USA
Posts: 48
|
The stock cam will work well with the stock heads. You're better off buying a Performer RPM intake, rejetting the carb or buying a 650 vacuum secondary Holley, and running 1.7RR until you can buy aftermarket heads. If you must cam, keep it small like the Crane 2020 or 2031 to work with the stock heads and you'll need to install new valve springs for the added lift and rpm (a pain in the arse with the heads on the motor). For good bang for the buck, install some underdrive pulleys.
__________________
88 NMRA Pure Street coupe 95 GT-heads, cam, exhaust, intake, road-race suspension 97 Taurus SHO-K&N, ported meter 95 Escort GT-Pacesetter header & exhaust, Weapon R intake tube |
|
|
 |
|
|