Performer RPM or Stealth

Dangerous Dave · 01-11-2001, 05:17 PM

Has anybody ran both and noticed any difference between the 2? What where the differences? Thanks.

-Dave

------------------
1988 GT-under construction

MiracleMax · 01-11-2001, 11:45 PM

Good question I've ran more than a coupla Edelbrocks and one or two Weiands. Never a stealth though. Always liked Edelbrocks manifold stuff. However to be honest all of their Performer and Performer RPM stuff is geared toward the street (as in mild combo's making like 400 hp with lots of torque) and then you have the race pieces which are at the other end of spectrum completely (Vic 5.0 intake and Vic race heads) they don't seem to have a middle ground despite the Performer, Performer RPM and Victor lines?. On an EFI intake things might be better because its easier to port the manifolds versus a dual plane 180 deg unit like the Performer RPM?

01-11-2001, 05:17 PM	#1
Dangerous Dave Registered Member Join Date: Sep 1999 Location: Minneapolis, MN Posts: 121	Performer RPM or Stealth Has anybody ran both and noticed any difference between the 2? What where the differences? Thanks. -Dave ------------------ 1988 GT-under construction

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM Engines	BLOCKER	Blue Oval Lounge	2	04-13-2004 12:35 AM
Speed Secret # 3	jim_howard_pdx	Windsor Power	13	11-09-2002 10:35 AM
Performer RPM vs RPM Air Gap	Phantom5oh	Windsor Power	17	01-10-2002 04:19 PM
PERFORMER RPM OR GT 40	5ohCOUPE	Windsor Power	3	09-23-2001 09:22 PM
Performer VS. Performer RPM	IMPULSERACING	Windsor Power	8	02-09-2001 12:45 PM

01-11-2001, 11:45 PM	#2
MiracleMax Registered Member Join Date: Apr 1999 Location: Hayes, Va, USA Posts: 798	Good question I've ran more than a coupla Edelbrocks and one or two Weiands. Never a stealth though. Always liked Edelbrocks manifold stuff. However to be honest all of their Performer and Performer RPM stuff is geared toward the street (as in mild combo's making like 400 hp with lots of torque) and then you have the race pieces which are at the other end of spectrum completely (Vic 5.0 intake and Vic race heads) they don't seem to have a middle ground despite the Performer, Performer RPM and Victor lines?. On an EFI intake things might be better because its easier to port the manifolds versus a dual plane 180 deg unit like the Performer RPM?