need help please

302crew · 03-12-2002, 03:26 PM

well here is the problem i have presure building up in my motor and its blowing steam out my pcv valve or if i take my oil cap off its comming out ive tested it when the car is hot and cold and it still does it please give me some suggestions

drudis · 03-12-2002, 03:49 PM

Lots'a blowby. Not much to "fix" other than a rebuild.

Make sure the PCV system works right, and maybe its just clogged.

302crew · 03-12-2002, 03:52 PM

how can it be blowby it doesnt burn any oil

RoadWarrior · 03-13-2002, 10:43 AM

Try throwing a compression tester on there. You'll be able to tell if you have blow-by or something else. But my guess is probably blow by. And thats easy to fix, all you need is a rebuild.

03-12-2002, 03:26 PM	#1
302crew Registered Member Join Date: May 1999 Location: sloatsburg Posts: 261	need help please well here is the problem i have presure building up in my motor and its blowing steam out my pcv valve or if i take my oil cap off its comming out ive tested it when the car is hot and cold and it still does it please give me some suggestions __________________ 306 edelbrock 6037 heads full mac exuast 1.7 rr 373 rear hd clutch tremec mighty demon 650 carb msd ignition rpm air gap intake custom cam still trying to get it to run right

03-12-2002, 03:49 PM	#2
drudis Moderator Join Date: Dec 1999 Location: Livonia, MI, USA Posts: 1,194	Lots'a blowby. Not much to "fix" other than a rebuild. Make sure the PCV system works right, and maybe its just clogged. __________________ Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com

03-12-2002, 03:52 PM	#3
302crew Registered Member Join Date: May 1999 Location: sloatsburg Posts: 261	how can it be blowby it doesnt burn any oil __________________ 306 edelbrock 6037 heads full mac exuast 1.7 rr 373 rear hd clutch tremec mighty demon 650 carb msd ignition rpm air gap intake custom cam still trying to get it to run right

03-13-2002, 10:43 AM	#4
RoadWarrior Registered Member Join Date: Apr 2000 Location: Edmonton,Alberta,Canada Posts: 317	Try throwing a compression tester on there. You'll be able to tell if you have blow-by or something else. But my guess is probably blow by. And thats easy to fix, all you need is a rebuild.