My NEW replacement Holley heads are different!

Rick 91GT · 04-23-2001, 06:45 AM

Paul as far as I know C&L doesn't require a jumper wire atleast the direction on my 76mm don't say that. I got rid of my 75mm Pro-M for the C&L I hope I made the right choice, it does look nice with the alum discharge tube.

The only thing I had issues with with my old set of heads "which nobody at Holley really knows what they exactly were" was all my exhaust valves just kissed the pistons on the out side edge of the eyebrow. Now on the new heads I don't have that problem and I have plently on clearance with the Anderson grind which is pretty decent. I don't think he will have any problems, when are you guys doing the install? How so they AFR heads look?

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ported e7's?	bailey_57	Windsor Power	28	07-15-2004 07:54 PM
71 2v Cleveland heads on a mild 302	crazypete	Windsor Power	3	06-18-2004 07:05 PM
What kind of Windsor heads?	vetteeatr	Windsor Power	11	10-28-2001 03:43 AM
For whoever it was considering using stock ported heads	2FastLX	Windsor Power	5	10-11-2001 01:53 PM
Holley Heads???	DemonGT	Windsor Power	8	01-03-2001 09:05 AM

04-23-2001, 06:45 AM	#1
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	Paul as far as I know C&L doesn't require a jumper wire atleast the direction on my 76mm don't say that. I got rid of my 75mm Pro-M for the C&L I hope I made the right choice, it does look nice with the alum discharge tube. The only thing I had issues with with my old set of heads "which nobody at Holley really knows what they exactly were" was all my exhaust valves just kissed the pistons on the out side edge of the eyebrow. Now on the new heads I don't have that problem and I have plently on clearance with the Anderson grind which is pretty decent. I don't think he will have any problems, when are you guys doing the install? How so they AFR heads look? ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!