Sill Plates

moc · 04-11-2002, 05:25 PM

Just put these on , tell me what you think

moc · 04-11-2002, 05:26 PM

moc · 04-11-2002, 05:28 PM

DRASTiK · 04-11-2002, 05:53 PM

I think they look good. Did you buy them or make them? Where can I get and how much for a set? My factory ones look like crap!

Dave

moc · 04-11-2002, 07:38 PM

No, i bought them from Pro3 Industries, Inc.

http://www.pro3i.com/

steeda makes them to ,but they are not as thick as these. these are heavy duty

DRASTiK · 04-12-2002, 12:18 AM

Man, I looked at them and I like them, but I don't want chrome ones. I want some black ones, maybe powdercoated, so I wouldn't be so worried about a scratch ruining them. Any suggestions? I don't know of anyone who makes them like that, but if I got a set like yours, could I make them black, or would it come out like crap because the paint wouldn't stick well to the surface?

moc · 04-12-2002, 12:33 AM

DRASTiK , i no what you are saying BUT .. when I got them today ,i wired tie them down and took a high speed buffing wheel to them ... And shined them up with Mothers aluminum polish . that i did the pictures did not give them justice ... cause they are shinney like a mirror .. and thats me . But when you get them they are a nice satin finish ( I should have left them be) cause now thats something else that I have to clean . they are thick and nice .. All you have to do is Hit them with 700 sand paper .prime them with a Zinc cromate type primer .then hit them with black.. but i'll tellya they do look nice .. and my car is black and I would not paint them cause they look so good when I open the door... More in the tradition of cars built a long time ago

joe4speed · 04-12-2002, 02:30 AM

Sweet... looks good...

Even the inside of your car is perfect...

Topless In Texas · 04-12-2002, 02:54 AM

HEY MOC! They look cool! I got em too. I got the ones w/ the GT emblem on them. Unfortunately, they are a little scuffed up. Specially on Caitlins side of the car. Need to polish them up real good. But they make it look sooo nice! Good choice! See you tomorrow at the Crystal Inn ???????????? We should be there between 6-7pm.
I should be in bed but i have to get up in 2 hours to get ready to go to the airport, and i'm afraid if i go to bed now, i wont wake up!

Check your private messages!
Car looks GREAT! TNT

04-11-2002, 05:25 PM	#1
moc Registered Member Join Date: Mar 1999 Location: Ocean City , Maryland Posts: 344	Sill Plates Just put these on , tell me what you think __________________ 1991 5.0 NotchBack,Black as of 05/04/09 34,300mi. 2001 LIGHTNING Black 29,872 mi. 05/04/09 (Hangar Queen) SMOKEM UP

04-11-2002, 05:26 PM	#2
moc Registered Member Join Date: Mar 1999 Location: Ocean City , Maryland Posts: 344	And again #2 __________________ 1991 5.0 NotchBack,Black as of 05/04/09 34,300mi. 2001 LIGHTNING Black 29,872 mi. 05/04/09 (Hangar Queen) SMOKEM UP

04-11-2002, 05:28 PM	#3
moc Registered Member Join Date: Mar 1999 Location: Ocean City , Maryland Posts: 344	And one more #3 __________________ 1991 5.0 NotchBack,Black as of 05/04/09 34,300mi. 2001 LIGHTNING Black 29,872 mi. 05/04/09 (Hangar Queen) SMOKEM UP

04-11-2002, 05:53 PM	#4
DRASTiK Registered Member Join Date: May 2001 Location: Yuma, AZ Posts: 536	I think they look good. Did you buy them or make them? Where can I get and how much for a set? My factory ones look like crap! Dave __________________ Dave 88 GT - 13.4@106 on street tires (2.2 60ft) My Stang RHC member #75 My stang is FOR SALE!!

04-11-2002, 07:38 PM	#5
moc Registered Member Join Date: Mar 1999 Location: Ocean City , Maryland Posts: 344	They would not be hard to make No, i bought them from Pro3 Industries, Inc. http://www.pro3i.com/ steeda makes them to ,but they are not as thick as these. these are heavy duty __________________ 1991 5.0 NotchBack,Black as of 05/04/09 34,300mi. 2001 LIGHTNING Black 29,872 mi. 05/04/09 (Hangar Queen) SMOKEM UP

04-12-2002, 12:18 AM	#6
DRASTiK Registered Member Join Date: May 2001 Location: Yuma, AZ Posts: 536	Man, I looked at them and I like them, but I don't want chrome ones. I want some black ones, maybe powdercoated, so I wouldn't be so worried about a scratch ruining them. Any suggestions? I don't know of anyone who makes them like that, but if I got a set like yours, could I make them black, or would it come out like crap because the paint wouldn't stick well to the surface? __________________ Dave 88 GT - 13.4@106 on street tires (2.2 60ft) My Stang RHC member #75 My stang is FOR SALE!!

04-12-2002, 12:33 AM	#7
moc Registered Member Join Date: Mar 1999 Location: Ocean City , Maryland Posts: 344	i no what you are talkin about DRASTiK , i no what you are saying BUT .. when I got them today ,i wired tie them down and took a high speed buffing wheel to them ... And shined them up with Mothers aluminum polish . that i did the pictures did not give them justice ... cause they are shinney like a mirror .. and thats me . But when you get them they are a nice satin finish ( I should have left them be) cause now thats something else that I have to clean . they are thick and nice .. All you have to do is Hit them with 700 sand paper .prime them with a Zinc cromate type primer .then hit them with black.. but i'll tellya they do look nice .. and my car is black and I would not paint them cause they look so good when I open the door... More in the tradition of cars built a long time ago __________________ 1991 5.0 NotchBack,Black as of 05/04/09 34,300mi. 2001 LIGHTNING Black 29,872 mi. 05/04/09 (Hangar Queen) SMOKEM UP

04-12-2002, 02:30 AM	#8
joe4speed He said Member...heh, heh Join Date: Sep 1999 Location: Jupiter, Florida U.S.A. Posts: 3,718	Sweet... looks good... Even the inside of your car is perfect... __________________ *Joe!* 1988 GT, 13.58@101mph Check out my listing! Click here! Or my website:www.joe4speed.com

04-12-2002, 02:54 AM	#9
Topless In Texas Not broken anymore! Join Date: May 2001 Location: La Porte, TEXASS :) Posts: 1,963	LOVE THEM PLATES! HEY MOC! They look cool! I got em too. I got the ones w/ the GT emblem on them. Unfortunately, they are a little scuffed up. Specially on Caitlins side of the car. Need to polish them up real good. But they make it look sooo nice! Good choice! See you tomorrow at the Crystal Inn ???????????? We should be there between 6-7pm. I should be in bed but i have to get up in 2 hours to get ready to go to the airport, and i'm afraid if i go to bed now, i wont wake up! Check your private messages! Car looks GREAT! TNT __________________ R.I.P. my Kinde..Jan. 19,1992-Aug. 22, 2003. Shes Cruisin' doggie heaven in a Blown Verte or a GTO!!! 2005 ROUSH GT Verte SuperStallions of the Net Feature, May 2002 RICE HATERS CLUB MEMBER #38!! O.B.C #5..thank you!! I feel so priveledged!! BONE STOCK~ Hell, its a ROUSH!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help woth installing groundpounder coilovers with BBK caster camber plates	ciara	Windsor Power	0	01-10-2004 01:08 PM
best camber/caster plates	johnmcgt	Windsor Power	3	06-11-2003 08:02 PM
caster/camber plates used with a strut tower brace	jtl	Windsor Power	1	02-10-2002 10:31 PM
Question about Door sill scuff plates	OnMy3rdStang	Appearance & Detailing	2	12-07-2001 11:29 AM