crankshaft pulley bolt size

stanger8172 · 05-25-2002, 09:30 PM

Of the four bolts holding the crankshaft pulley in, what size fitting is used for the heads of the bolts?

Thanks

stanger8172 · 05-25-2002, 10:30 PM

i am swapping pulleys so what should i use?

5.0PiMpin · 05-26-2002, 01:34 AM

i used an end wrench , but it was a pain , dont remember the size sorry, i was wondering what other type of tool u can use to take off the pulleys once u put them on, the end wrench aint cutting it no more

05-25-2002, 09:30 PM	#1
stanger8172 Registered Member Join Date: Nov 2000 Location: Milwaukee,Wisconsin Posts: 380	crankshaft pulley bolt size Of the four bolts holding the crankshaft pulley in, what size fitting is used for the heads of the bolts? Thanks __________________ '91 LX convertible , T-5, Centerforce Dual Friction, MSD Blaster Coil, FR 9MM wires, 13* timing, 1.6rr, ported/polished/milled stock heads, 1.94/1.60 stainless valves, March Performance Pulleys, K&N panel, 1"spacer, BBK shorties, 2 1/2" off road H, Summit 2 1/2" catback

05-25-2002, 10:30 PM	#2
stanger8172 Registered Member Join Date: Nov 2000 Location: Milwaukee,Wisconsin Posts: 380	i am swapping pulleys so what should i use? __________________ '91 LX convertible , T-5, Centerforce Dual Friction, MSD Blaster Coil, FR 9MM wires, 13* timing, 1.6rr, ported/polished/milled stock heads, 1.94/1.60 stainless valves, March Performance Pulleys, K&N panel, 1"spacer, BBK shorties, 2 1/2" off road H, Summit 2 1/2" catback

05-26-2002, 01:34 AM	#3
5.0PiMpin Registered Member Join Date: Nov 2001 Location: Daly City CA USA baby Posts: 42	i used an end wrench , but it was a pain , dont remember the size sorry, i was wondering what other type of tool u can use to take off the pulleys once u put them on, the end wrench aint cutting it no more __________________ off road h-pipe , under drive pulley's , stage one center force clutch, removed air silencer, flows, K&N, 130 Amp pain in my alternator, optima yellow top 3.73 gears aluminum drive shaft and pro5.0 shifter...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
QUICK: What belt size for 7in crank pulley with a 3.33in charger pulley? Vortech...	JaxMustang50	Power Adders	0	05-01-2003 06:44 PM
2000 Mustang Crankshaft pulley	zzsmart	Modular Madness	1	11-15-2002 08:28 PM
how do I break loose the crank pulley bolt?	tomazzzo	Windsor Power	4	05-05-2002 01:14 AM
Help! Crankshaft bolt snapped	waldoo28	Modular Madness	1	09-29-2001 04:54 PM
Header bolt size	swtstang	Windsor Power	1	05-22-2001 07:03 PM