Line Locks???

BowTie Eater 5 Liter · 05-20-2001, 12:58 AM

Which line lock should I buy??? a while ago I herd someone saying that they were spinning in circles because it only locked one of the front wheels?!?
is there any line locks that will work PROPERLY on my car???
thanks.....

------------------
1988 Mustang GT, T-5
3.08's, No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe, K&N Air Filter (Stock Air Box), Removed Air SilencerMy Stang
My Site (Not Done Yet)

fordgasm · 05-20-2001, 10:10 AM

Hurst...they have been around for many years and build a very reliable line lock. I have had the same one for about 5 years without a single problem. Plus they are rebuildable.

------------------
fordgasm
CLICK HERE to see my 87 GT

Spark Checker · 05-20-2001, 10:35 AM

I also had my Hurst line lock for over 5 years no problems. One thing line locks dont like to be held on for over several minutes so they wont burn out. Plus they are rebuildable.

------------------
See my mustang at prime-fe2.lvcm.com/sparkckr/pineapple.html

WADS56 · 05-21-2001, 05:10 AM

I bought a cheap one from summit. It was like only 35 bucks and still works fine for 2 years now.

------------------
347 W/ A-trim 6#'s, Canfield heads, out of the box Systemax II intake, solid roller cam. 11.1 @123mph

93lx 5.0 daily driver

BowTie Eater 5 Liter · 05-21-2001, 02:20 PM

wads56, do you have to buy anything else with the linelock from summit? also, do you have the part #?

thanks

------------------
1988 Mustang GT, T-5
3.08's, No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe, K&N Air Filter (Stock Air Box), Removed Air SilencerMy Stang
My Site (Not Done Yet)

WADS56 · 05-21-2001, 11:09 PM

I don't remember the part# for the line lock. I also bought the instalation kit with it that came with brake lines and fitings.

05-20-2001, 12:58 AM	#1
BowTie Eater 5 Liter Registered Member Join Date: Nov 2000 Location: Maple Ridge B.C. Canada, The Best Place In The World Posts: 871	Line Locks??? Which line lock should I buy??? a while ago I herd someone saying that they were spinning in circles because it only locked one of the front wheels?!? is there any line locks that will work PROPERLY on my car??? thanks..... ------------------ 1988 Mustang GT, T-5 3.08's, No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe, K&N Air Filter (Stock Air Box), Removed Air SilencerMy Stang My Site (Not Done Yet)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Return fuel line on 90 GT (UR .02 cents wanted)	BigCountryGT	Windsor Power	2	03-15-2004 03:20 PM
255 LPH pump...return line pressure too high...ideas??	84LX89GT	Windsor Power	1	05-12-2003 07:31 PM
Line Locks	NOSstang08690	Modular Madness	2	02-19-2003 11:57 PM
Line lock question-which line goes to front brakes	Stang_ROTY	Windsor Power	1	05-20-2002 03:53 PM
Line Locks?	bcinyuz	Windsor Power	1	06-10-2001 10:48 PM

05-20-2001, 10:10 AM	#2
fordgasm Registered Member Join Date: Jan 1999 Location: Clayton, North Carolina, USA Posts: 803	Hurst...they have been around for many years and build a very reliable line lock. I have had the same one for about 5 years without a single problem. Plus they are rebuildable. ------------------ fordgasm CLICK HERE to see my 87 GT

05-20-2001, 10:35 AM	#3
Spark Checker Registered Member Join Date: Nov 1998 Location: Las Vegas, Nv. Posts: 68	I also had my Hurst line lock for over 5 years no problems. One thing line locks dont like to be held on for over several minutes so they wont burn out. Plus they are rebuildable. ------------------ See my mustang at prime-fe2.lvcm.com/sparkckr/pineapple.html

05-21-2001, 05:10 AM	#4
WADS56 gear banger Join Date: Aug 2000 Location: CHICAGO Posts: 1,144	I bought a cheap one from summit. It was like only 35 bucks and still works fine for 2 years now. ------------------ 347 W/ A-trim 6#'s, Canfield heads, out of the box Systemax II intake, solid roller cam. 11.1 @123mph 93lx 5.0 daily driver

05-21-2001, 02:20 PM	#5
BowTie Eater 5 Liter Registered Member Join Date: Nov 2000 Location: Maple Ridge B.C. Canada, The Best Place In The World Posts: 871	wads56, do you have to buy anything else with the linelock from summit? also, do you have the part #? thanks ------------------ 1988 Mustang GT, T-5 3.08's, No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe, K&N Air Filter (Stock Air Box), Removed Air SilencerMy Stang My Site (Not Done Yet)

05-21-2001, 11:09 PM	#6
WADS56 gear banger Join Date: Aug 2000 Location: CHICAGO Posts: 1,144	I don't remember the part# for the line lock. I also bought the instalation kit with it that came with brake lines and fitings.