
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
|
|
#1 |
|
Registered Member
Join Date: Mar 2002
Location: Austin, TX
Posts: 18
|
i've been running a stage 1 nos 80 shot on my mildly modified 94 cobra for about a month.. my entire electrical system is still stock so i just keep my base timing retarded.. i'm about to add about a 9# vortech blower which i'm putting together from buying parts here and there but i don't have any electrical stuff..
the question is, how can i run auto boost retard then have it compensate for when the spray kicks in at full throttle.. should i run an msd btm and then add a timing computer that will compensate for the spray? OR should i run a msd digital 6 plus and use the built in single stage retard for the spray and add a boost timing computer OR can i just get a custom ship burned that can do all or any of this? I don't know if any of this will work! it just all sounds good in theory! as far as hooking the nitrous retard up, i think i can connect it straight to the solenoid so that whenever it gets power (opens) it will initiate the retard.. any advice will be VERY helpful!!
__________________
00' GT, vortech sq-trim, full exhaust, 90mm maf, 42#r's, megabyte jr.'s, custom diablo chip.. + too much more too list.. run's high 11's |
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Total timing vs initial timing for max HP. | Dark_5.0 | Windsor Power | 35 | 04-28-2009 11:35 PM |
| Check engine light after steeda pullies / timing adjuster!! HELP!! | MineralGray02K | Modular Madness | 1 | 09-29-2002 01:11 AM |
| points and timing specs | xfernal | Classic Mustangs | 1 | 12-30-2001 04:20 PM |
| timing chain or timing gear | mustang66teen | Classic Mustangs | 11 | 06-18-2001 08:44 PM |
| fuel pressure, TPS setting, and timing for supercharger | gramsch | Windsor Power | 5 | 05-07-2001 12:16 PM |
