![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Apr 2002
Posts: 299
|
![]() My car wont start ( this same thing happened last year!) I turn the key and I hear 1 click then go to crank it and nothing. Then I have no interior lights or any power at all. Yesterday this happened, I popped the hood. closed the doors and looked under neath the hood (basically did nothing). Went back inside and it started up fine. Come home and turn the car off. I went to start it up again, and nothing again. Sometimes I get interior lights with full power, but not enought to crank it over. other times very faint power, and others none at all. It can be jump started, however (temporary fix) the problem may pop up later on. I know the battery is still good and has water in the cells. The alternator is good too. Im guessing the starter is good seeing as how it cranks over fine with jumping it. Two years ago I replaced something under the driver side seat. Could this be the problem? the ignition? please help i need to go to work later today!! Thank you for any responses.
jim
__________________
90 lx hatch, holley systemax II kit, rebuilt 302, BBK 155 lph fuel pump, pro M bullet mass meter wtih BBk cold air intake, 30 # injectors, 70 mm TB, jacobs ignition system, edelbrock water pump, BBk longtube headers with h-pipe, flowmasters, b&m ripper shifter, 3.55 gears, Proform electric fan, subframe connectors/removed smog pump and ac! 75 shot of nitrous! 13.2 at 112 1/4 mile- no traction! |
![]() |
![]() |
![]() |
#2 |
2 Stangs in the Stable
Join Date: Apr 2002
Location: Baytown, TX
Posts: 1,209
|
![]() Check the connection on your battery cables. This happened to me and I tried everything except the obvious. You may need to replace them. I have had the same problem and it was the neg cable. If everything is tight, try cleaning them.
__________________
'90 GT Under construction Best E.T. = Fast @ High Speeds - OK So I Lie. So What!!! ![]() ![]() 04 F-150 STX 4.2L 5 spd Rice Haters Club Member #128 |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Mar 1999
Location: Jackson, LA
Posts: 264
|
![]() sounds like a battery cable to me also. but whenever you get it started again i would definatley go test the batt and alt free and a parts house, just to be safe. good luck
__________________
GT-40X heads(58cc), Cobra upper and lower, 75 mm Bullet, Moroso fenderwell induction, FRPP 65mm TB, 24# injectors, black magic electric fan, phenolic spacer, 1.7 crane cobra roller rockers, crane 2031, BBK 1 5/8 equal length hearders, 2.5 inch off road pipe, 2.5 flowmaster catback, FMS 3.55 gears, T5-Z transmission, FRPP aluminum driveshaft, svo heavy duty clutch, mcleod bullet proff bellhousing, BBK adjustable cluth quadrant, hurst billet shifter, lakewood subframes, BBK strut tower brace, BBK 2pt lower cross bar, FMS 190 lph fuel pump, crane ps91 coil, FMS street pulleys, and 300+ race wires. All thanks goes to my wife sheri, jason, jeff, robby, my dad and all others you helped contribute. most importantly GOD!!! |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: May 2000
Location: Kamloops, BC
Posts: 2,875
|
![]() Yep could be the battery, you should also check the ground.
|
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Apr 2002
Posts: 299
|
![]() i checked the cables both neg and pos. they were fine, no fraying or melting and screwed on tightly. i jumped it a moment ago and ran for a few seconds before i put the brake on- when i did, it stalled. I jumped it again and brought up the rpms while stepping on the brake and it still ran. when I put the head lights on, the battery needle drops low and jumps up and down. when their off it moves a little too at idle. The radio when turned up is fuzzy and the chime for the door being open is also distorted. This same thing happened last year and i bought a new battery and put it in, it was ok. (EVEN THOUGH they said it was tested as being ok). So thats why i dont think it is the battery 1 yr old too. Any other suggestions . this is FRUSTRATING!!!!!
![]()
__________________
90 lx hatch, holley systemax II kit, rebuilt 302, BBK 155 lph fuel pump, pro M bullet mass meter wtih BBk cold air intake, 30 # injectors, 70 mm TB, jacobs ignition system, edelbrock water pump, BBk longtube headers with h-pipe, flowmasters, b&m ripper shifter, 3.55 gears, Proform electric fan, subframe connectors/removed smog pump and ac! 75 shot of nitrous! 13.2 at 112 1/4 mile- no traction! |
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Feb 2002
Location: minnesota
Posts: 129
|
![]() sounds like a dead battery to me....
even though the cables are tight, they still corrode and loose conductivity. remove the cables and clean them and the posts. also check the selenoid end and the ground end.. if thats not it, then the other options would be a new battery or maybe the alternator is shot...
__________________
91 LX 'work in progress' previous stangs; lightly modded 84GT 81 2.3 converted to 302 auto |
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: Apr 2002
Posts: 299
|
![]() its fixed thanks to all of you who responded! I appreciate it. It actually was the obvious (I hate to admit it). I roughed up the negative cable with sand paper, tightened it up and then tightened it up where it led down under the motor somewhere( this was pretty loose). Thanks to all who helped, im an idiot!!
![]()
__________________
90 lx hatch, holley systemax II kit, rebuilt 302, BBK 155 lph fuel pump, pro M bullet mass meter wtih BBk cold air intake, 30 # injectors, 70 mm TB, jacobs ignition system, edelbrock water pump, BBk longtube headers with h-pipe, flowmasters, b&m ripper shifter, 3.55 gears, Proform electric fan, subframe connectors/removed smog pump and ac! 75 shot of nitrous! 13.2 at 112 1/4 mile- no traction! |
![]() |
![]() |
![]() |
#8 |
Conservative Individualist
Join Date: May 1997
Location: Wherever I need to be
Posts: 7,487
|
![]() Hey, we all have to live and learn. You have. No shame in that and at least your problem was easy to fix - and free.
Consider it a learning experience that didn't cost you anything but time. ![]() |
![]() |
![]() |
![]() |
#9 |
Registered Member
Join Date: Mar 2002
Location: Arizona
Posts: 172
|
![]() You know, it is a funny thing that you mentioned that this happend to you. I just purchased my car about a week ago, and this is my 3rd day driving it. I went into the gas station to get some gas. When I got done filling up the tank, I went in to start it. It clicked once, and nothing happened. Me neighbor happened to be getting gas, and he gave me a jump start. Absolutely nothing happened. I didn't even get gauges. My negative terminal cable had corossion on it and was loose. I moved it around a little but, got back into the car, and bam. It started. Guess we just need to check our cables every once in a while.
Anyways, if it's not a dead battery, I hope that you get your problem resolved soon.
__________________
91 Mustang LX 5.0 Convertible AOD Mdifications: K&N filter, Mac Catback, BBK aluminum u/d pulleys. |
![]() |
![]() |
![]() |
#10 |
Mustang Enthusiast
Join Date: Mar 2002
Posts: 528
|
![]() I had this problem last week. I didn't check the cables, but I know the negative cable was not tight. I'm glad this solved your problem, because it's probably the cause of mine. Thanks, Keith
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wont Start, help! 1995 GT 5.0 | Year2001Boogie | Windsor Power | 13 | 05-05-2004 09:26 PM |
Wont Start, Dies, Help ! 1995 GT-5.0 | Year2001Boogie | Modular Madness | 8 | 04-29-2004 02:12 PM |
EEC does not energize unless key turned to start | crazypete | Windsor Power | 23 | 09-20-2002 09:00 AM |
sometimes car turns over a lot but doesn't start | MineralGray02K | Modular Madness | 3 | 09-16-2002 10:41 PM |
Need some professional advice - head work, valve springs, rockers, cam. pretty long. | AxemanZZ | Windsor Power | 15 | 01-11-2001 01:30 PM |