Full Posi... Which one do i get????

JD93GT · 06-01-2001, 11:18 PM

I dont know a whole lot about rearends, but i want to get a full posi rearend in my 93 gt, which one is good, better, best? I hear Auburn is a really good rearend, how much for those? Plus, i dont want to have a rachety rearend, its a daily driver, and i dont want alot of whine, noise, or siffness. Thanks in advance for your posts

egiap's 5.0 · 06-02-2001, 06:49 AM

The auburn is a good unit. I've heard moroso is the best. But I think its a locker. So you will hear some noise. Your looking at $500 or so. Does any one use power trax that just replaces spider gears. I've seem them for $300 price range. Are they any good. Try soom amsoil series 2000 gear lube to finish the job. Hope I helped.

------------------
Independent Amsoil dealer. For needs or information about amsoil synthetic products leave a message. Ask about preffered customer program.

93CobraR · 06-02-2001, 10:08 PM

Theres no question that the Detriot Locker is the best out there.

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,Crane 2031, Edelbrock intake, long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 12.96
Best MPH 103.42
Best 60' 1.695

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

chris91LX · 06-03-2001, 10:57 AM

I've heard the Detroit Locker is the best too, but it's $5-$600 just for the unit. I just got an Auburn put in. $299 for the unit from Summit and it should be under $200 for the labor. The question to look at is how much power your planning to put to the rear wheels. The best bet is to get the 31 spline axles, c-clip eliminators and a heavy duty differential cover for strength. If you go this route your rear end should be pretty bullet proof, but it will cost you about a thousand.

------------------
91 LX 5.0
Z t-5, 3:73 gear, Vortech 73mm Mass Air, Accufab 65mm TB, BBK underdrives, Crane HI-6S Ignition, BBK unequal length headers, Bassani x pipe, 2.5" Dynomax Super Turbo cat back, Kenny Brown Super Subs, Factory Five Control Arms, Mac cold air kit, Nitto D/R's and more to come!

JD93GT · 06-03-2001, 01:25 PM

Well i plan on a Vortech V-2 S trim in the near future. Cobra intake, ported stock heads. I know i will need to do at least a rebuild to the rearend to handle this much power. Im looking for something thats gonna be just as good on the street as the track, because this mustang is gonna be a daily driver at least for the next couple years. I dont want a locking differental. just something mild. I have seen tracion lok rearends with 31 spline for sale for mid 200's, and auburn differential's for high 200's up through 300's. But i dont know the pro's, con's or damn near anything about these rearends. So any help would be great

06-01-2001, 11:18 PM	#1
JD93GT Registered Member Join Date: Feb 2001 Location: San Diego, Ca USA Posts: 52	Full Posi... Which one do i get???? I dont know a whole lot about rearends, but i want to get a full posi rearend in my 93 gt, which one is good, better, best? I hear Auburn is a really good rearend, how much for those? Plus, i dont want to have a rachety rearend, its a daily driver, and i dont want alot of whine, noise, or siffness. Thanks in advance for your posts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New to board, 8" posi swap question	JChalfan	Classic Mustangs	2	01-31-2003 11:30 PM
Auburn posi ???'s...please help	dragstang86	Windsor Power	6	10-08-2002 05:52 PM
Full length or shorties?	Nicodemus	Small Ponies	5	08-04-2002 10:55 AM
New Auburn Posi, noise when turning	bark3rd	Modular Madness	7	11-07-2001 05:17 PM
full length or standard length subframe connectors?	84stangLX	Windsor Power	4	04-23-2001 03:48 PM

06-02-2001, 06:49 AM	#2
egiap's 5.0 Registered Member Join Date: Apr 2001 Location: Mansfield, OH. Posts: 113	The auburn is a good unit. I've heard moroso is the best. But I think its a locker. So you will hear some noise. Your looking at $500 or so. Does any one use power trax that just replaces spider gears. I've seem them for $300 price range. Are they any good. Try soom amsoil series 2000 gear lube to finish the job. Hope I helped. ------------------ Independent Amsoil dealer. For needs or information about amsoil synthetic products leave a message. Ask about preffered customer program.

06-02-2001, 10:08 PM	#3
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	Theres no question that the Detriot Locker is the best out there. ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,Crane 2031, Edelbrock intake, long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 12.96 Best MPH 103.42 Best 60' 1.695 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html

06-03-2001, 10:57 AM	#4
chris91LX Registered Member Join Date: Oct 1998 Location: Suburban Chicago, Hanover Park Posts: 695	I've heard the Detroit Locker is the best too, but it's $5-$600 just for the unit. I just got an Auburn put in. $299 for the unit from Summit and it should be under $200 for the labor. The question to look at is how much power your planning to put to the rear wheels. The best bet is to get the 31 spline axles, c-clip eliminators and a heavy duty differential cover for strength. If you go this route your rear end should be pretty bullet proof, but it will cost you about a thousand. ------------------ 91 LX 5.0 Z t-5, 3:73 gear, Vortech 73mm Mass Air, Accufab 65mm TB, BBK underdrives, Crane HI-6S Ignition, BBK unequal length headers, Bassani x pipe, 2.5" Dynomax Super Turbo cat back, Kenny Brown Super Subs, Factory Five Control Arms, Mac cold air kit, Nitto D/R's and more to come!

06-03-2001, 01:25 PM	#5
JD93GT Registered Member Join Date: Feb 2001 Location: San Diego, Ca USA Posts: 52	Well i plan on a Vortech V-2 S trim in the near future. Cobra intake, ported stock heads. I know i will need to do at least a rebuild to the rearend to handle this much power. Im looking for something thats gonna be just as good on the street as the track, because this mustang is gonna be a daily driver at least for the next couple years. I dont want a locking differental. just something mild. I have seen tracion lok rearends with 31 spline for sale for mid 200's, and auburn differential's for high 200's up through 300's. But i dont know the pro's, con's or damn near anything about these rearends. So any help would be great