AFR Heads....

dragstang86 · 10-11-2002, 09:22 PM

I think im gonna take your guys advice and go with the AFR 165 heads...Where is the best or cheapest place to buy them from? How much does an assembled 58cc set cost? how much of a gain do you think ill see goin to these in place of my gt-40p heads?

306
gt-40p
cobra intake-ported lower
70mm throttle body
bbk cold air
E303 cam
stock MAF and injectors
roller rockers
all the other bolt on stuff
373's

c-4 tranny 3500 stall

thanks for the help

Stang Runner · 10-11-2002, 10:10 PM

Well as far as HP gain I cant say But you should be about 300 to the rear wheels or so with them on there I look all over and here is one of the best place to get them JD's Performance

PS. might want to get a new mass Air and 24's for it to run best.

dragstang86 · 10-11-2002, 11:39 PM

Thanks alot for all ur help...soon ill have some AFRs

10-11-2002, 09:22 PM	#1
dragstang86 Registered Member Join Date: Sep 2002 Location: baltimore, md Posts: 220	AFR Heads.... I think im gonna take your guys advice and go with the AFR 165 heads...Where is the best or cheapest place to buy them from? How much does an assembled 58cc set cost? how much of a gain do you think ill see goin to these in place of my gt-40p heads? 306 gt-40p cobra intake-ported lower 70mm throttle body bbk cold air E303 cam stock MAF and injectors roller rockers all the other bolt on stuff 373's c-4 tranny 3500 stall thanks for the help

10-11-2002, 10:10 PM	#2
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	Well as far as HP gain I cant say But you should be about 300 to the rear wheels or so with them on there I look all over and here is one of the best place to get them JD's Performance PS. might want to get a new mass Air and 24's for it to run best. __________________ Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help I need heads!!	SmokinStangGT	Windsor Power	18	05-04-2003 10:05 PM
New FRP Heads for 96 - 98 4.6	surfbeast	Modular Madness	9	11-21-2002 07:02 PM
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads	slow98	Modular Madness	6	10-25-2002 04:28 PM
GT-40 heads	5.0 Pony	Windsor Power	1	09-10-2002 10:26 PM
Which heads are beter?	patman	Classic Mustangs	3	12-02-1999 03:42 AM

10-11-2002, 11:39 PM	#3
dragstang86 Registered Member Join Date: Sep 2002 Location: baltimore, md Posts: 220	Thanks alot for all ur help...soon ill have some AFRs