347 Cam

stevil · 06-17-2001, 10:12 PM

Anyone have a idea on what cam I should run on a 347. Im going to run gt-40 iron heads of some type and a explorer intake. My buddy told me that I need a .325 duration at least but I think thats a little extreme.
Thanks

Five0 · 06-17-2001, 10:50 PM

That sounds a lot extreme especially for the street. I would say to call comp cams and have them recommend a cam. I would go with like a f-303 or a e-303 with those heads.
Just my opinion.

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
12.565 @109.38mph 1.764 60ft

faststang90 · 06-18-2001, 08:50 AM

the heads are not that good on flow #s a large would not help . is it a motor car, nos car, blower need to know to say what cam is it a street car what is it auto or 5 speed things u need to know call a shop and tell all your information and they will help u better your friend is a dumbas*

Oldschoolpony · 06-18-2001, 06:48 PM

I'm running a 347 with dart jr's stage 3 and a lunati 51018 cam with crane lifters and pushrods. Let me tell you, I shift at 6800-7000 and its screams. : ). I burnt 1 of my wires and had the wrong plugs( to shallow for the darts ) and still made 279 RWHP on the dyno before porting the heads and intake.

06-17-2001, 10:12 PM	#1
stevil Registered Member Join Date: Jun 2001 Location: NJ Posts: 5	347 Cam Anyone have a idea on what cam I should run on a 347. Im going to run gt-40 iron heads of some type and a explorer intake. My buddy told me that I need a .325 duration at least but I think thats a little extreme. Thanks

06-17-2001, 10:50 PM	#2
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	That sounds a lot extreme especially for the street. I would say to call comp cams and have them recommend a cam. I would go with like a f-303 or a e-303 with those heads. Just my opinion. ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX 12.565 @109.38mph 1.764 60ft

06-18-2001, 08:50 AM	#3
faststang90 Registered Member Join Date: May 2001 Location: baytown,tx,us Posts: 128	the heads are not that good on flow #s a large would not help . is it a motor car, nos car, blower need to know to say what cam is it a street car what is it auto or 5 speed things u need to know call a shop and tell all your information and they will help u better your friend is a dumbas*

06-18-2001, 06:48 PM	#4
Oldschoolpony Registered Member Join Date: Mar 2001 Location: Gainsville,Fl Posts: 229	I'm running a 347 with dart jr's stage 3 and a lunati 51018 cam with crane lifters and pushrods. Let me tell you, I shift at 6800-7000 and its screams. : ). I burnt 1 of my wires and had the wrong plugs( to shallow for the darts ) and still made 279 RWHP on the dyno before porting the heads and intake.