Speed Density Guys- NEED HELP PLEASE

Rick 91GT · 06-19-2001, 07:24 AM

Yes a A-trim for a SD car, according to Vortech and a couple tuners it can be done as long as it has the blow off valve and the air is released into the atmosphere, and it has the FMU. He plans on going to Mass Air later this year, or sooner if Vortech is wrong. The Accel DFI is a Speed Density system adn lots of people run these with blowers, however I do understand that a DFI is tunable.

PROBLEM SOLVED!
Well we fixed the problem, it was the top vacuum module that is located on the passenger side shock tower. Thanks for all the advice and help.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TFS #1 cam & speed density. Will it work?	skiwesser	Windsor Power	0	06-16-2004 02:57 AM
speed density systems	guitardawg	Windsor Power	6	09-18-2003 03:26 PM
speed density	racerx0071	Windsor Power	4	09-05-2003 09:14 AM
Speed Density Cobra?	UglyFast88	Windsor Power	6	12-10-2002 11:25 PM
speed density question..	bobtodd	Blue Oval Lounge	2	04-15-2001 02:03 AM

06-19-2001, 07:24 AM	#9
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	Yes a A-trim for a SD car, according to Vortech and a couple tuners it can be done as long as it has the blow off valve and the air is released into the atmosphere, and it has the FMU. He plans on going to Mass Air later this year, or sooner if Vortech is wrong. The Accel DFI is a Speed Density system adn lots of people run these with blowers, however I do understand that a DFI is tunable. *PROBLEM SOLVED!* Well we fixed the problem, it was the top vacuum module that is located on the passenger side shock tower. Thanks for all the advice and help. ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP