Fidanza Flywheel Dowel Pins

RICKYRM125CC · 10-27-2002, 07:42 PM

ITS THE WEEKEND AND I WAS ALL SET TO INSTALL MY NEW CENTERFORCE DUEL FRICTION CLUTCH ,FIDANZA ALUMINUM FLYWHEEL, AND FORD RACING ALUMINUM DRIVE SHAFT. MY PROBLEMS STARTED AFTER TRYING TO LOSSEN THE CLUTCH CABLE ,I BROKE THE CABLE IN TWO ,AFTER FINDING A REPLACEMENT I REMOVED THE REST OF THE TRANNY AND DISCOVERED THE CLUTCH FORK AND PIVOT BALL NEEDED REPLACED AS WELL. ALL WAS WELL AFTER FINDING A FORD DEALER ON A SATURDAY THAT ACTUALLY HAD THE PARTS I NEEDED.THEN CAME TIME TO CLEAN EVERYTHING UP GOOD AND GET THIS THING BACK ON THE ROAD WHERE IT BELONGS.REINSTALLING QUICKLY CAME TO A SCREECHING HALT AFTER DISCOVERING THE DOWEL PINS FROM MY STOCK FLYWHEEL WERE LARGER THAN THE DOWEL HOLES IN THE NEW FLYWHEEL. NOW IS WHERE ALL YOU READERS COM IN ,DOES ANYONE KNOW IF THE OLDER FORDS USE A SMALLER DOWEL PIN? OF COARSE THE MANUFACTURE IS CLOSED ON THE WEEKEND SO THEY ARE NO HELP!
THE REASON FOR THIS QUESTION IS THAT THE FLYWHEEL HAS AN INTERCHANGEABLE WEIGHT SO IT COULD BE USED ON AN OLDER 302

10-27-2002, 07:42 PM	#1
RICKYRM125CC Registered Member Join Date: Oct 2002 Location: CLAYCOMO MISSOURI Posts: 9	Fidanza Flywheel Dowel Pins ITS THE WEEKEND AND I WAS ALL SET TO INSTALL MY NEW CENTERFORCE DUEL FRICTION CLUTCH ,FIDANZA ALUMINUM FLYWHEEL, AND FORD RACING ALUMINUM DRIVE SHAFT. MY PROBLEMS STARTED AFTER TRYING TO LOSSEN THE CLUTCH CABLE ,I BROKE THE CABLE IN TWO ,AFTER FINDING A REPLACEMENT I REMOVED THE REST OF THE TRANNY AND DISCOVERED THE CLUTCH FORK AND PIVOT BALL NEEDED REPLACED AS WELL. ALL WAS WELL AFTER FINDING A FORD DEALER ON A SATURDAY THAT ACTUALLY HAD THE PARTS I NEEDED.THEN CAME TIME TO CLEAN EVERYTHING UP GOOD AND GET THIS THING BACK ON THE ROAD WHERE IT BELONGS.REINSTALLING QUICKLY CAME TO A SCREECHING HALT AFTER DISCOVERING THE DOWEL PINS FROM MY STOCK FLYWHEEL WERE LARGER THAN THE DOWEL HOLES IN THE NEW FLYWHEEL. NOW IS WHERE ALL YOU READERS COM IN ,DOES ANYONE KNOW IF THE OLDER FORDS USE A SMALLER DOWEL PIN? OF COARSE THE MANUFACTURE IS CLOSED ON THE WEEKEND SO THEY ARE NO HELP! THE REASON FOR THIS QUESTION IS THAT THE FLYWHEEL HAS AN INTERCHANGEABLE WEIGHT SO IT COULD BE USED ON AN OLDER 302 Last edited by RICKYRM125CC; 10-27-2002 at 09:17 PM..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
is the analizer flywheel or rearwheel horepower??	superduty	Blue Oval Lounge	5	08-02-2004 08:52 AM
Fidanza Flywheel Dowel Pins	RICKYRM125CC	Windsor Power	3	10-31-2002 04:16 PM
which flywheel inbalance?	dlb1982	Windsor Power	5	10-15-2002 07:25 PM
Aluminum Flywheel Help	buck95	Windsor Power	6	12-02-2001 07:29 AM
Flywheel	Phantom5oh	Windsor Power	15	09-26-2001 04:44 PM