Another heads question

90LxDroptop · 11-09-2002, 03:06 PM

Heyo, Well I might be getting some new heads real soon, so I'm wondering which would be best if I were to stay N/A. I want to do a heads/cam/intake combo. I've got about $1000, give or take to spend. I want to make this vert. really fly! So any suggestions are greatly appreciated. Thanx

Suave

sn95gt19 · 11-09-2002, 03:37 PM

your not going to get very far for $1000.00-

trick flow heads
I HAVE AN EDELBROCK RPM INTAKE FOR SALE(BEEN ON CAR FOR ONLY 2 WEEKS, THING IS BRAND NEW)
OR JUST GET SOME EXHAUST AND SPRAY IT.
SPRAY IT
SPRAY IT
SPRAY IT

IF IT STARTS KNOCKING, FINISH IT OFF BY SPRAYING IT

J/K YOU DONT WANT TO FOLLOW IN MY FOOTSTEPS, COSTS TOO MUCH.

GOOD LUCK

Agent_4573 · 11-09-2002, 07:25 PM

for a grand you could get gt40p heads, intake, headers, cam and roller rockers, or you could get a set of afr or twisted wedge heads for just over a grand.

90LxDroptop · 11-10-2002, 02:45 AM

Quote:

Originally posted by Agent_4573
for a grand you could get gt40p heads, intake, headers, cam and roller rockers, or you could get a set of afr or twisted wedge heads for just over a grand.

By how much do twisted wedge heads outflow gt-40 heads? worth the money? I'm guessing yes..And what's the difference between them that make them so much better.

11-09-2002, 03:06 PM	#1
90LxDroptop Registered Member Join Date: Jun 2001 Location: Arlington Hts. IL Posts: 315	Another heads question Heyo, Well I might be getting some new heads real soon, so I'm wondering which would be best if I were to stay N/A. I want to do a heads/cam/intake combo. I've got about $1000, give or take to spend. I want to make this vert. really fly! So any suggestions are greatly appreciated. Thanx Suave __________________ 90 LX Convertible 5.0 AOD 3.73 Gears, Underdrive Pulleys, TransGo shift kit, A servo, Subframe Connectors, o/r h-pipe, 2 chamber flows, Pony Wheels

11-09-2002, 03:37 PM	#2
sn95gt19 motors done......woohooo Join Date: Mar 2002 Posts: 799	your not going to get very far for $1000.00- trick flow heads I HAVE AN EDELBROCK RPM INTAKE FOR SALE(BEEN ON CAR FOR ONLY 2 WEEKS, THING IS BRAND NEW) OR JUST GET SOME EXHAUST AND SPRAY IT. SPRAY IT SPRAY IT SPRAY IT IF IT STARTS KNOCKING, FINISH IT OFF BY SPRAYING IT J/K YOU DONT WANT TO FOLLOW IN MY FOOTSTEPS, COSTS TOO MUCH. GOOD LUCK __________________ 95gt lazer red (98 cobra clone) Rice Haters Club Member #116

11-09-2002, 07:25 PM	#3
Agent_4573 Registered Member Join Date: May 2002 Location: New Jersey Posts: 375	for a grand you could get gt40p heads, intake, headers, cam and roller rockers, or you could get a set of afr or twisted wedge heads for just over a grand. __________________ '89 LX 5.0, off-road h pipe, flowmaster muffs, underdrive pulleys, rebuilt WC T-5, King Cobra Clutch, 65mm throttle body, Explorer Upper/GT40 lower, Lakewood Rear Lift Bars. 76mm C&L Mass air w/ inlet pipe, Twisted wedge heads w/ stage 2 port,polish, MAC equal length shorties, Billet AFPR, 255LPH fuel pump, fresh low end w/ 10.5:1 compression. If anyone ever wants to go to Raceway Park in Englishtown New Jersey, give me a shout. RICER HATERS CLUB MEMBER 87! www.ricehatersclub.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT-40X heads ?	Mustang_289	Windsor Power	9	09-30-2003 08:21 AM
New Heads. Any Tips	66StangGuy	Classic Mustangs	5	09-15-2003 08:20 PM
question on EDEL heads ...6022	vande97	Windsor Power	3	02-16-2002 03:19 PM
Heads and Cam....tough question	cyberstang5.0	Windsor Power	2	12-07-2001 09:22 AM
A general question about heads!	Thad	Windsor Power	0	10-10-2001 11:17 AM