Horsepower guess's?

Smokedawg · 06-28-2001, 03:17 PM

How much horsepower should this combo make on and off the supercharger. Thanks

347 stroker motor
4340 steel crank
4340 eagle h-beam rods
J E pistons
Canton 7 qt oil pan
Vortech S-trim supercharger polished
Edelbrok Performer heads 2.02 1.60
Crane Pro Race Gold 1.6 ratio
Chrome Valve covers
GT-40 fully ported lower intake
Downs Ford upper intake polished
75 mm T-body Accufab polished
77 mm mass air Pro-M
Anderson Ford Power pipes
Vortech Super Blow off valve
Msd ignition Msd Distributor
30lb injectors with 6:1 FMU which comes to 60lb injectors
JBA headers
H-Pipe
Flowmaster 2 chamber exhaust
Sub-Frame connectors
Southside Lift bars
70/30 50/50 Lakewood shocks & airbag
Battery relocated in trunk
16in Saleen Rims (5)
Welds w/ Slicks
Cobra Trans
Custom Cam for Blower

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

PKRWUD · 06-28-2001, 04:12 PM

What compression are the pistons, how much boost do you expect, and do you have any of the specs on the cam?

06-28-2001, 03:17 PM	#1
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Horsepower guess's? How much horsepower should this combo make on and off the supercharger. Thanks 347 stroker motor 4340 steel crank 4340 eagle h-beam rods J E pistons Canton 7 qt oil pan Vortech S-trim supercharger polished Edelbrok Performer heads 2.02 1.60 Crane Pro Race Gold 1.6 ratio Chrome Valve covers GT-40 fully ported lower intake Downs Ford upper intake polished 75 mm T-body Accufab polished 77 mm mass air Pro-M Anderson Ford Power pipes Vortech Super Blow off valve Msd ignition Msd Distributor 30lb injectors with 6:1 FMU which comes to 60lb injectors JBA headers H-Pipe Flowmaster 2 chamber exhaust Sub-Frame connectors Southside Lift bars 70/30 50/50 Lakewood shocks & airbag Battery relocated in trunk 16in Saleen Rims (5) Welds w/ Slicks Cobra Trans Custom Cam for Blower ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Free Horsepower	Spyder319	Power Adders	2	04-05-2004 03:26 PM
How come horsepower tv gained a very small amount of hp off a 70mm TB on a 97 stang?	96_4.6	Modular Madness	14	12-07-2003 01:07 AM
raced a Supra Twin Turbo	Stang35th	Stang Stories	63	08-23-2003 12:36 AM
Please Comment of Speed Secret # 2	jim_howard_pdx	Windsor Power	20	11-06-2002 11:44 AM
Horsepower TV's response to my e-mail	MTU 50	Blue Oval Lounge	19	10-28-2002 02:55 PM

06-28-2001, 04:12 PM	#2
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	What compression are the pistons, how much boost do you expect, and do you have any of the specs on the cam?