Wich heads for 550 hp ??

-RootS- · 01-15-2003, 11:35 PM

I'm looking for a set of heads that will give me about 500 550 hp on a 351. I'll be a race engine but i don't want something too costly. I don't want too much compression no more than 11:1 and I don't want to spin the motor part 6500. Any idea

429mustang · 01-15-2003, 11:54 PM

If I were building a motor, I'd go with TFS High Ports.

Skyman · 01-16-2003, 01:24 PM

Something ported, any of the aftermarket heads are good. TFS, etc.

Skyler

sn95gt19 · 01-16-2003, 01:26 PM

if your keeping it 351 cu. in. i would say trick flow twisted wedge (ported) if your stroking it i would say trick flow r series, with some intake and bowl work.

WADS56 · 01-16-2003, 01:37 PM

I like my Canfield's. They could handle 500 hp easy on a 351.

01-15-2003, 11:35 PM	#1
-RootS- Registered Member Join Date: Sep 2001 Location: Lévis, Québec, Canada Posts: 12	Wich heads for 550 hp ?? I'm looking for a set of heads that will give me about 500 550 hp on a 351. I'll be a race engine but i don't want something too costly. I don't want too much compression no more than 11:1 and I don't want to spin the motor part 6500. Any idea

01-15-2003, 11:54 PM	#2
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	If I were building a motor, I'd go with TFS High Ports. __________________ 1990 Notchback: BBK Ceramic Coated Full length headers, Dr. Gas 3"- 2 1/2" x-pipe, Flowmaster 40's/turndowns.

01-16-2003, 01:24 PM	#3
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Something ported, any of the aftermarket heads are good. TFS, etc. Skyler __________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.

01-16-2003, 01:26 PM	#4
sn95gt19 motors done......woohooo Join Date: Mar 2002 Posts: 799	if your keeping it 351 cu. in. i would say trick flow twisted wedge (ported) if your stroking it i would say trick flow r series, with some intake and bowl work. __________________ 95gt lazer red (98 cobra clone) Rice Haters Club Member #116

01-16-2003, 01:37 PM	#5
WADS56 gear banger Join Date: Aug 2000 Location: CHICAGO Posts: 1,144	I like my Canfield's. They could handle 500 hp easy on a 351. __________________ 79 Hatch: NA 347, Stage 2 Canfield Heads, Victor JR. Intake, Blueprinted Holley 750 HP, Solid Roller Cam, Shooting for 10's on motor 93 LX: Tremec, dual friction clutch, fms flywheel, Hedman shorties, O/R H-pipe Ricer hater's club member #49

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New FRP Heads for 96 - 98 4.6	surfbeast	Modular Madness	9	11-21-2002 07:02 PM
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads	slow98	Modular Madness	6	10-25-2002 04:28 PM
GT-40 heads	5.0 Pony	Windsor Power	1	09-10-2002 10:26 PM
My NEW replacement Holley heads are different!	Rick 91GT	Windsor Power	8	04-23-2001 06:45 AM
Which heads are beter?	patman	Classic Mustangs	3	12-02-1999 03:42 AM