MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 03-05-2003, 10:51 AM   #1
Chevysucks
Registered Member
 
Join Date: Mar 2000
Location: Stroudsburg, PA, USA
Posts: 150
Default

Technick-- No the problem that I am having is not on the car that is in my signature. The problem that I am having is on my stock 89 gt. All it has done to it is exhaust.

I don't think that the guy that had it before me ever changed the spark plugs, because today I pulled them out and two of them broke in half and they were all white. Now I need to go get spark plug wires because the metal piece that is in them that connects to the plugs pulled out when I took them off.

And for the mismatch you are talking about, They are not stock heads, I just recently found out that they are GT40X heads, and I didn't put that in my sig. It does have the stock intake manifold on it, but nothing else is stock. The guy that had it before me, the pushrods were between 1/4 and 1/2 inch to short, and he had the air conditioning on at the line with slicks it ran a 13.01. Since then I put crane cams extra hardened pushrods and crane cams 1.7 roller rockers, 1 inch intake spacer, bbk cold air, in it. I am sure it is capable of a 12.9 or 12.8.
__________________
88 Stang
306 ci.
GT Mustang heads- ported and polished/milled---Soon to be AFR 185cc
1.7 crane roller rockers/extra hardened pushrods
FRPP X-303 Cam
Stock Intake-1 inch intake spacer
BBK Cold Air Induction
Stock Injectors--going to 24 pounders
BBK Full Length Headers
Mac 2.5 inch Cat-Back
8 Point Cage
Sub Frame Connectors
World Class T-5
Steeda Shift Cable,Quadrant,Firewall adjuster
King Cobra Clutch
Pro 5.0 Shifter
Alunimum Driveshaft/ Drive shaft loop
Kenny Brown suspension
3.55 gears
Chevysucks is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sputtering at low RPM COUSIN ROB Modular Madness 1 06-12-2003 04:35 PM
Engine Sputtering after 351W swap(EFI) bluethunder87 Windsor Power 36 06-05-2003 03:57 AM
Engin sputtering at 3k Rpm SteveAZ Windsor Power 1 04-29-2003 01:54 AM
Having sputtering/stalling problems Chris_H Windsor Power 8 03-17-2003 04:44 PM
SPUTTERING ENGINE Froedge-Martin Small Ponies 2 06-06-1999 12:34 PM


All times are GMT -5. The time now is 03:45 AM.


SEARCH