© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
07-23-2001, 03:56 PM | #1 |
Registered Member
Join Date: Jul 2001
Location: SanDiego,CA,USA
Posts: 29
|
N20 Help
I was pretty sold on the idea of getting the edelbrock big shot to go with my edelbrock intake, but I have been hearing bad stuff about the wet kits, I was also going to get the Jacobs mastermind too. Could I just get the stage 1 NOS dry kit, add the 150 solenoid(already have the fuel system to support it) and then not have to get the jacobs? How much timing will I have to back off when running over 100 shot? any help is appreciated, NOS? ZEX?Nitrous Express? any better than the other?
------------------ 89lx, Edelbrock Performer Heads, Edelbrock performer Intake,Comp Cams Extreme Energy cam, BBK 65mm TB,73mm Mass Air,24lb Injectors,255lph fuel pump,373's,full maximum motorsports suspension system,baer 5 lug conversion with cross drilled rotors, 17x9 cobra "r" rims,JBA shorties,bbk offroad h-pipe,flowmaster w\dumps,underdrive pullies,moroso cold air,275/40/17 BFG Drag radials. (Big Shot coming soon) |
07-23-2001, 07:09 PM | #2 |
Registered Member
Join Date: Feb 1999
Location: Utica, Michigan
Posts: 2,631
|
I have an aluminium headed 302 and I have the stage 1 from NOS, jetted up to 150. (67 & 42 jets) I run 14 degrees inital timing, with Champion RCY9C's gapped @ .035. My ignition system is stock except for an MSD coil.
I have made several passes on a hot, humid day with no problems. My fuel system is only a BBK 255 intank, and 24 lb injectors. ------------------ 1988 Mustang GT 11.8 @ 123 (7/14/01) 1992 BadAzz Wrangler 1993 Explorer |
07-24-2001, 09:58 AM | #3 |
Registered Member
Join Date: Aug 2000
Location: Plymouth, MI
Posts: 254
|
Top Gun makes a kit that puts a plate between the upper and lower intakes. This eliminates the concerns about the wet kits, since the fuel doesn't flow through the upper intake.
------------------ Moxie Racing The Nitrous Oxide Information Site |
07-24-2001, 10:17 PM | #4 |
Registered Member
Join Date: Apr 2000
Location: middleburg, fl, usa
Posts: 1,134
|
You are supposed to pull 2 degrees of timing out per 50 hp shot of n20.
------------------ James Cox nochevy@hotmail.com 1991 Mustang LX 12.565 @109.38mph 1.764 60ft |
|
|