Now I'm confused...help please.

Falcons Talon · 05-07-2003, 07:27 PM

I just received some 3.73's that I purchased from an ebay store. They came in two boxes and I thought "One box for the pinion and one box for the ring.

I open them both up and lo and behold, there is a ring and pinion set in each box...Now, I've never replaced my gears, but if I'm not mistaken, the rear only takes one ring and pinion set...am I correct?

Both pinion shafts are stamped 3.73 and one of them has the good old ford oval on it.

Would someone care to take a stab at explaining what I got?

Thanks

FT

BlueMust5089 · 05-07-2003, 07:44 PM

Well........ lemme think, you got two sets of gears. I'd hold on to them for a while amd of nothing comes of it resell them.

Falcons Talon · 05-07-2003, 07:51 PM

Well, you see, that's what I thought as well, but then I thought..."Nahhh, things like this don't happen to me...Unless you count the brand new BBK ceramic longtubes and matching offroad short H I got for $285...Then again, I did dish out $300 for an Explorer upper, lower, and 65mm throttle body.

I guess it all just averages out...

Well, we'll see what comes of it.

Thanks

FT

BlueMust5089 · 05-07-2003, 08:42 PM

You have good prices falling in your lap

Falcons Talon · 05-08-2003, 09:09 AM

Yeah, well I look and call all over the place...Now I need to work on some GT-40 heads for cheap...

BilLster · 05-08-2003, 09:12 AM

i figured it out you were suppose to send them to me .

for the wifes car

05-07-2003, 07:27 PM	#1
Falcons Talon T.P.M. President Join Date: May 2002 Location: Brownsville Posts: 265	Now I'm confused...help please. I just received some 3.73's that I purchased from an ebay store. They came in two boxes and I thought "One box for the pinion and one box for the ring. I open them both up and lo and behold, there is a ring and pinion set in each box...Now, I've never replaced my gears, but if I'm not mistaken, the rear only takes one ring and pinion set...am I correct? Both pinion shafts are stamped 3.73 and one of them has the good old ford oval on it. Would someone care to take a stab at explaining what I got? Thanks FT

05-07-2003, 07:44 PM	#2
BlueMust5089 Registered Member Join Date: Apr 2002 Location: Baltimore MD Posts: 47	Well........ lemme think, you got two sets of gears. I'd hold on to them for a while amd of nothing comes of it resell them. __________________ There are only TWO ways to find out what I'm running Ask me OR race me!

05-07-2003, 08:42 PM	#4
BlueMust5089 Registered Member Join Date: Apr 2002 Location: Baltimore MD Posts: 47	You have good prices falling in your lap __________________ There are only TWO ways to find out what I'm running Ask me OR race me!

05-08-2003, 09:09 AM	#5
Falcons Talon T.P.M. President Join Date: May 2002 Location: Brownsville Posts: 265	Yeah, well I look and call all over the place...Now I need to work on some GT-40 heads for cheap... __________________

05-08-2003, 09:12 AM	#6
BilLster Registered Member Join Date: Oct 2000 Location: Ontario canada Posts: 446	i figured it out you were suppose to send them to me . for the wifes car __________________ 89 with 331 t3'/t4 hybrids. upr Suspention worked out finnaly . 9.89 144 mph .

05-07-2003, 07:51 PM	#3
Falcons Talon T.P.M. President Join Date: May 2002 Location: Brownsville Posts: 265	Well, you see, that's what I thought as well, but then I thought..."Nahhh, things like this don't happen to me...Unless you count the brand new BBK ceramic longtubes and matching offroad short H I got for $285...Then again, I did dish out $300 for an Explorer upper, lower, and 65mm throttle body. I guess it all just averages out... Well, we'll see what comes of it. Thanks FT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Confused, I need help on different fuel pump wiring methods.	5.0 Fiend	Windsor Power	12	10-14-2004 06:43 PM
Yeah, I'm confused	MattwantsSpeed	Windsor Power	4	12-31-2002 01:13 PM
Did oil change and now I'm confused.	stevstum	Windsor Power	6	11-12-2002 11:33 PM
!!!!!!! What size injectors are these? :confused:	bcarter	Windsor Power	24	05-10-2002 06:26 PM
Help Me Please!!! I'm confused	utcreed	Modular Madness	5	12-08-2001 01:04 PM