Which muffler to choose.

eeh1025 · 06-01-2003, 01:12 PM

Hi there, i currently have long tubes an off road hp and flows. dont get me wrong its loud but not loud enough. ive heard alot loudier out there. i was thinking of getting the Dynomax Race Magnum Bullet Mufflers, but i was wondering if that would be like just taking the muffler off and putting a tube in it or will it slience it a bit. Borla makes one just like it but they are pricey, if you guys have any other suggeetion that would be great. thanks alot

429mustang · 06-01-2003, 02:53 PM

the bullets have a small baffle in them so it'll be slightly quieter than straightpipes, you could also try the Dynomax Race Magnums (they look similar to a flowmaster) or the Flowmaster DeltaForce race mufflers.

Scrapla · 06-02-2003, 10:37 AM

If you want cheap my not just replace your mufflers with maybe two cherry bombs or glass packs I think there like $6 bucks at pep boys or autozone in a big barrel, just my .02

5.0Riot · 06-02-2003, 11:38 AM

I would stick with the flowmasters. The Delta Flowmasters are actually silenced MORE than the original 40 Series Flowmasters. Maybe try 3" pipes with new 40 series. Also I am not sure if you have CATs or not. In Massachusetts you have to keep them on, not sure aobut where you live.

429mustang · 06-02-2003, 01:15 PM

I'm not talking about the deltaflows, I'm talking about the Delta- FORCE race mufflers. They're a single chamber flowmaster and supposed to be pretty loud. Maybe ditch the H-pipe and get a 3inch setup.

LayanRubr · 06-02-2003, 04:53 PM

Another thing to consider is cut outs after the headers. Electronic, manual, or just go under and unscrew the lids. Open pipes : )

Dark_5.0 · 06-02-2003, 05:15 PM

On power adder cars the cut outs do help alot. With performance and sound.

blue oval 50h · 06-02-2003, 05:30 PM

I ordered a set of 3" spintech sportsman mufflers. Should be on this week. Will let you know how they sound. Heard a clip from hardcore 50 and they sound AWESOME.

eeh1025 · 06-03-2003, 06:27 AM

Hey guys thanks for all the replys. i went with the 4" flomaster 1 chamber deltaforces. I had and custom H pipe made the exact same way as the one i just got, but the guy made it with 4" pipes and it is still bolt on, he weld flanges on to it, the tail pipes were also redone to 4" all the way out the back. The car sounds soo good, it not too loud when idle but when i take off look out its like having a glasspack but with the flowmaster sound. thanks alot guys
Ernie

5.0Riot · 06-03-2003, 08:19 AM

Sorry about that 429 mustang. I misread your post.

429mustang · 06-03-2003, 12:23 PM

Hey dude, no big deal. EEH1025, you should try and post some mpg's/soundclips after you install them. Anyone know of any good videos of a mustang w/single chamber flowmasters on it? I think there might have been be a soundclip on mustangexhaust.com, but it wasn't good.

eeh1025 · 06-03-2003, 02:56 PM

Hey there
i have a laptop, and i will record the sound and post it.
Ernie

429mustang · 06-03-2003, 08:33 PM

Do it up!

06-01-2003, 01:12 PM	#1
eeh1025 Registered Member Join Date: Feb 2003 Location: NJ Posts: 81	Which muffler to choose. Hi there, i currently have long tubes an off road hp and flows. dont get me wrong its loud but not loud enough. ive heard alot loudier out there. i was thinking of getting the Dynomax Race Magnum Bullet Mufflers, but i was wondering if that would be like just taking the muffler off and putting a tube in it or will it slience it a bit. Borla makes one just like it but they are pricey, if you guys have any other suggeetion that would be great. thanks alot __________________ 93 GT 351 to 393 stroker, GT40 upper and lower intake, GT40X Turbo Swirl heads, holley 80mm throttle body, 255 fuel pump, 42 lb injector, JE pistons, Comp cam, comp lifters, comp pushrods, comp springs, crane Roller rockers. Trick flow Crank Shaft, comp Timing chain. MSD 7 series ignition, msd hvc2 coil, MSD timing adjust, MSD Pro billet Dis, Hooker long tube, Off road H pipe 1 chanber race flows, 4.10 gears, Vortech cooler and T-Trim with a 25lb boost AND LOTS MORE.

06-01-2003, 02:53 PM	#2
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	the bullets have a small baffle in them so it'll be slightly quieter than straightpipes, you could also try the Dynomax Race Magnums (they look similar to a flowmaster) or the Flowmaster DeltaForce race mufflers. __________________ 1990 Notchback: BBK Ceramic Coated Full length headers, Dr. Gas 3"- 2 1/2" x-pipe, Flowmaster 40's/turndowns.

06-02-2003, 10:37 AM	#3
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	If you want cheap my not just replace your mufflers with maybe two cherry bombs or glass packs I think there like $6 bucks at pep boys or autozone in a big barrel, just my .02 __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

06-02-2003, 01:15 PM	#5
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	I'm not talking about the deltaflows, I'm talking about the Delta- FORCE race mufflers. They're a single chamber flowmaster and supposed to be pretty loud. Maybe ditch the H-pipe and get a 3inch setup. __________________ 1990 Notchback: BBK Ceramic Coated Full length headers, Dr. Gas 3"- 2 1/2" x-pipe, Flowmaster 40's/turndowns.

06-02-2003, 04:53 PM	#6
LayanRubr Registered Member Join Date: Feb 2002 Location: Aggieland, Texas Posts: 297	Another thing to consider is cut outs after the headers. Electronic, manual, or just go under and unscrew the lids. Open pipes : ) __________________ 87 Mustang 5.0 (308) Notchback - The Blue Baron Rice Hater's Club member #20

06-02-2003, 11:38 AM	#4
5.0Riot Registered Member Join Date: May 2003 Location: Pittsfield, MA Posts: 8	I would stick with the flowmasters. The Delta Flowmasters are actually silenced MORE than the original 40 Series Flowmasters. Maybe try 3" pipes with new 40 series. Also I am not sure if you have CATs or not. In Massachusetts you have to keep them on, not sure aobut where you live.

06-02-2003, 05:15 PM	#7
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	On power adder cars the cut outs do help alot. With performance and sound. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

06-02-2003, 05:30 PM	#8
blue oval 50h Registered Member Join Date: Dec 1998 Location: NJ Posts: 219	I ordered a set of 3" spintech sportsman mufflers. Should be on this week. Will let you know how they sound. Heard a clip from hardcore 50 and they sound AWESOME. __________________ 347- 10.63@128 N/A

06-03-2003, 06:27 AM	#9
eeh1025 Registered Member Join Date: Feb 2003 Location: NJ Posts: 81	Hey guys thanks for all the replys. i went with the 4" flomaster 1 chamber deltaforces. I had and custom H pipe made the exact same way as the one i just got, but the guy made it with 4" pipes and it is still bolt on, he weld flanges on to it, the tail pipes were also redone to 4" all the way out the back. The car sounds soo good, it not too loud when idle but when i take off look out its like having a glasspack but with the flowmaster sound. thanks alot guys Ernie __________________ 93 GT 351 to 393 stroker, GT40 upper and lower intake, GT40X Turbo Swirl heads, holley 80mm throttle body, 255 fuel pump, 42 lb injector, JE pistons, Comp cam, comp lifters, comp pushrods, comp springs, crane Roller rockers. Trick flow Crank Shaft, comp Timing chain. MSD 7 series ignition, msd hvc2 coil, MSD timing adjust, MSD Pro billet Dis, Hooker long tube, Off road H pipe 1 chanber race flows, 4.10 gears, Vortech cooler and T-Trim with a 25lb boost AND LOTS MORE.

06-03-2003, 08:19 AM	#10
5.0Riot Registered Member Join Date: May 2003 Location: Pittsfield, MA Posts: 8	Sorry about that 429 mustang. I misread your post.

06-03-2003, 12:23 PM	#11
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	Hey dude, no big deal. EEH1025, you should try and post some mpg's/soundclips after you install them. Anyone know of any good videos of a mustang w/single chamber flowmasters on it? I think there might have been be a soundclip on mustangexhaust.com, but it wasn't good. __________________ 1990 Notchback: BBK Ceramic Coated Full length headers, Dr. Gas 3"- 2 1/2" x-pipe, Flowmaster 40's/turndowns.

06-03-2003, 02:56 PM	#12
eeh1025 Registered Member Join Date: Feb 2003 Location: NJ Posts: 81	Hey there i have a laptop, and i will record the sound and post it. Ernie __________________ 93 GT 351 to 393 stroker, GT40 upper and lower intake, GT40X Turbo Swirl heads, holley 80mm throttle body, 255 fuel pump, 42 lb injector, JE pistons, Comp cam, comp lifters, comp pushrods, comp springs, crane Roller rockers. Trick flow Crank Shaft, comp Timing chain. MSD 7 series ignition, msd hvc2 coil, MSD timing adjust, MSD Pro billet Dis, Hooker long tube, Off road H pipe 1 chanber race flows, 4.10 gears, Vortech cooler and T-Trim with a 25lb boost AND LOTS MORE.

06-03-2003, 08:33 PM	#13
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	Do it up! __________________ 1990 Notchback: BBK Ceramic Coated Full length headers, Dr. Gas 3"- 2 1/2" x-pipe, Flowmaster 40's/turndowns.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Weird Muffler Crackle	Treachery	Windsor Power	3	07-17-2004 03:13 PM
exhaust	Tikitoes	Modular Madness	19	10-23-2003 04:18 PM
Muffler recommendation	studawg66	Classic Mustangs	5	01-09-2002 08:30 PM
How do I choose the right tire size?!	90LxDroptop	Windsor Power	4	12-27-2001 10:49 PM
Lemme recommend a muffler...	Red_LX	Small Ponies	0	06-09-1999 08:04 PM