© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
06-27-2003, 10:26 AM | #1 |
Registered Member
Join Date: Jul 2000
Location: Norman, Oklahoma, USA
Posts: 597
|
GT40P header question
I'm going to use a set of GT40P heads. I know that the spark plugs are at a different angle than the stock E7 heads, but do you guys know of any long tubes that will fit these heads? I know you can get the FMS shorty GT40P headers, but what about long tubes? Thanks yall!
__________________
Michael Black QuantumMotorsports Norman, OK 1984 LX Hatch 306 w/ TRW forged flat toppers, Comp Cams Magnum 292H, GT40P heads w/ 3 angle valve job, .550 lift springs, Angus Racing Roller Rockers, Weiand Stealth Intake, Holley 4150 650cfm carb, MAC 1 5/8 Long Tubes, Single Chamber Flowmasters, 91' T5 w/ Pro 5.0 shifter, Turbo Coupe 8.8 Rear w/ 3.55 gears, QA1 Motorsports tubular K member, no interior except steering wheel and seat. Coming soon: 6 or 8 point cage, Fuel Cell, Weld Draglites |
06-27-2003, 10:32 AM | #2 |
Registered Member
Join Date: Jul 2000
Location: Norman, Oklahoma, USA
Posts: 597
|
Actually, let me ask you this, does anyone have GT40P's with a set of BBK 1 5/8 long tubes? That's what I'm wanting to run. You guys know if they will fit? Maybe I should just email BBK. Thanks guys.
__________________
Michael Black QuantumMotorsports Norman, OK 1984 LX Hatch 306 w/ TRW forged flat toppers, Comp Cams Magnum 292H, GT40P heads w/ 3 angle valve job, .550 lift springs, Angus Racing Roller Rockers, Weiand Stealth Intake, Holley 4150 650cfm carb, MAC 1 5/8 Long Tubes, Single Chamber Flowmasters, 91' T5 w/ Pro 5.0 shifter, Turbo Coupe 8.8 Rear w/ 3.55 gears, QA1 Motorsports tubular K member, no interior except steering wheel and seat. Coming soon: 6 or 8 point cage, Fuel Cell, Weld Draglites |
06-27-2003, 01:49 PM | #3 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
They dont fit.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
06-27-2003, 07:10 PM | #4 |
Registered Member
Join Date: Jul 2000
Location: Norman, Oklahoma, USA
Posts: 597
|
Gee, thanks for that useful piece of info, do you know of any long tubes that do fit?
__________________
Michael Black QuantumMotorsports Norman, OK 1984 LX Hatch 306 w/ TRW forged flat toppers, Comp Cams Magnum 292H, GT40P heads w/ 3 angle valve job, .550 lift springs, Angus Racing Roller Rockers, Weiand Stealth Intake, Holley 4150 650cfm carb, MAC 1 5/8 Long Tubes, Single Chamber Flowmasters, 91' T5 w/ Pro 5.0 shifter, Turbo Coupe 8.8 Rear w/ 3.55 gears, QA1 Motorsports tubular K member, no interior except steering wheel and seat. Coming soon: 6 or 8 point cage, Fuel Cell, Weld Draglites |
06-28-2003, 10:51 AM | #5 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
well I know first hand that the MAC 1-5/8" longtubes work. Because I have them on my P heads on my car.
I put a heat shield boot on my #4 sparkplug because it was a little close, and put a 90degree spark plug boot end on the #7 because you cant fit the 135degree ones in that one. The other six plugs are fine. A few of them are a little tight to get out, but I've gotten all 8 out while the engine is hot without burning my hands, so its not THAT bad. On the tight ones, I just put the sparkplug socket on the plug, then I use a 3/4" wrench on the hex end of the socket to get it out instead of a ratchet. Let me know if you have any more questions, and don't let the P head sparkplug clearance rumors scare you into buying those overpriced shorty headers! longtubes for life baby
__________________
NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft |
06-28-2003, 01:46 PM | #6 |
Registered Member
Join Date: Jul 2000
Location: Norman, Oklahoma, USA
Posts: 597
|
five oh patrol, Thanks man,
That's just what I was wanting to hear. I'll check out those Mac headers. Do you know how much they cost? Thanks a bunch man.
__________________
Michael Black QuantumMotorsports Norman, OK 1984 LX Hatch 306 w/ TRW forged flat toppers, Comp Cams Magnum 292H, GT40P heads w/ 3 angle valve job, .550 lift springs, Angus Racing Roller Rockers, Weiand Stealth Intake, Holley 4150 650cfm carb, MAC 1 5/8 Long Tubes, Single Chamber Flowmasters, 91' T5 w/ Pro 5.0 shifter, Turbo Coupe 8.8 Rear w/ 3.55 gears, QA1 Motorsports tubular K member, no interior except steering wheel and seat. Coming soon: 6 or 8 point cage, Fuel Cell, Weld Draglites |
06-28-2003, 02:14 PM | #7 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
I think they're about $220 new, but I got mine from ebay slightly used for like $140.
Check out ebay and the classifieds on various message boards (Corral always has a bunch). Dont worry about the finish of a used pair, because the HTC crap coating on the MAC headers burns off within a few days anyway. Unless you jet-hot them, they won't look that great. But for the price, I couldnt pass it up.
__________________
NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft |
06-28-2003, 09:17 PM | #8 |
Registered Member
Join Date: Jul 2000
Location: Norman, Oklahoma, USA
Posts: 597
|
Hey 5 oh, are these the headers? They're funky shaped compared to other long tubes. They look cool. Were they tough to install? I have a tubular K member and the engine is out of the car so it shouldn't be a prob. Thanks man.
__________________
Michael Black QuantumMotorsports Norman, OK 1984 LX Hatch 306 w/ TRW forged flat toppers, Comp Cams Magnum 292H, GT40P heads w/ 3 angle valve job, .550 lift springs, Angus Racing Roller Rockers, Weiand Stealth Intake, Holley 4150 650cfm carb, MAC 1 5/8 Long Tubes, Single Chamber Flowmasters, 91' T5 w/ Pro 5.0 shifter, Turbo Coupe 8.8 Rear w/ 3.55 gears, QA1 Motorsports tubular K member, no interior except steering wheel and seat. Coming soon: 6 or 8 point cage, Fuel Cell, Weld Draglites |
06-29-2003, 03:10 PM | #9 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
Yeah those look to be the ones. You can tell by the drivers side one, because teh steering shaft goes between 2 of the primaries. That part is a bit of a hassle on the install, but since the motor is out, you won't have one bit of a problem putting them in.
I did mine with the motor in the car. Had to jack the engine up to get the passenger side header in, and remove the steering shaft to do the drivers side. Other than that, they weren't too bad. good luck
__________________
NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Header Question | Jamie_DTR | Windsor Power | 6 | 04-17-2003 07:58 AM |
Header question | bigred90gt | Windsor Power | 4 | 03-24-2003 12:38 AM |
Header and Exhaust Installation | 1991GT | Windsor Power | 4 | 12-03-2002 11:17 PM |
simple question | Lonzo | Classic Mustangs | 3 | 09-10-2002 09:37 AM |
Header question | tomcat_37096 | Windsor Power | 3 | 10-08-2001 05:14 PM |