Help, loading up at idle

306bullet · 07-19-2003, 01:09 AM

I just fired my new 306 today, and I have to hold the pedal down to the floor when I first start it. Then it wants to load up at an idle. It is running so rich, that it burns my eyes

I am running 30 lb injectors and a 255 pump. Any suggestions on how I can fix this?

Thanks Brent

PKRWUD · 07-19-2003, 02:59 PM

You've got a leaky injector. Pull them out and blow compressed air (regulated to 45 psi) through them, and see which ones allow the air to go through. Then either clean them, or replace them.

Take care,
~Chris

07-19-2003, 01:09 AM	#1
306bullet Registered Member Join Date: Jul 2002 Location: Indiana Posts: 51	Help, loading up at idle I just fired my new 306 today, and I have to hold the pedal down to the floor when I first start it. Then it wants to load up at an idle. It is running so rich, that it burns my eyes I am running 30 lb injectors and a 255 pump. Any suggestions on how I can fix this? Thanks Brent

07-19-2003, 02:59 PM	#2
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	You've got a leaky injector. Pull them out and blow compressed air (regulated to 45 psi) through them, and see which ones allow the air to go through. Then either clean them, or replace them. Take care, ~Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adjusting Length of high idle on Carb 5.0	twilightcall	Windsor Power	8	08-06-2003 08:31 AM
Idle problem and jerking?	69fastback	Windsor Power	10	01-11-2003 05:58 PM
'95' 5.0 won't idle	prplhays	Windsor Power	7	02-04-2002 10:57 AM
Problems with TFS engine combo..wont idle right and sputters when you give it throttl	dashapht	Windsor Power	8	07-17-2001 12:23 AM
I am over the idle deal	TomEboi	Modular Madness	3	03-24-2001 03:57 PM