MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 08-21-2003, 09:41 PM   #1
vertcrazy
Registered Member
 
Join Date: Aug 2003
Location: Bannister Michigan
Posts: 3
Default help smoke form tail pipes

ok i have white/gray/black smoke and yellowish kinda rusty water color junk coming from my tail pipes and it smells really rich so i pulled the plugs they are all clean on the driver side but the pass side the # 2 plug was wet smelled like gas and the others looked a little rich any ideas could it be the injector hanging open would that make it smoke or is it a head gasket it really does not smell like coolant though and the oil is clean and i haven't lost any coolant o and it had a really bad miss and help or ideas i have to fix this thing fast i have to drive two hours to school on sunday and this all start after i changed the injectors form 19# to 24# because a had code 41 and 91 but it di not fix it so i put back in the 19# and than it started
__________________
1991 5.0 LX Convertible
1991 Z28 Convertible
1968 Chevy 1/2 ton 4X4
vertcrazy is offline   Reply With Quote
Old 08-23-2003, 01:25 AM   #2
TMASTER
Registered Member
 
TMASTER's Avatar
 
Join Date: Sep 2002
Location: TEXAS
Posts: 161
Default hmmm

Is the car running bad???
What does the #2 plug look like strap/electrode?

The best thing to do at this point is to replace the injector for #2 if that one had gas all over it. Otherwise put the 24's back in.
maybe its pouring so much gas into that cylinder that the gas is making its way to the end of the pipes still in liquid form! lol, smell the liquid comming out of there! not too much though

try and be more specific on the color of the smoke too, all those colors could be anything! good luck.
TMASTER is offline   Reply With Quote
Old 08-23-2003, 08:46 AM   #3
LX5liter
dude5l
 
LX5liter's Avatar
 
Join Date: May 2001
Location: Grande Prairie, Alberta, Canada
Posts: 603
Default

Check your ignition system before you replace the injectors (cap, wires, plug(s)), it could just be a bad wire or spark plug. Also, you probably already know this but since you didn't mention it I will, you need to relace the stock MAF with one calibrated for the injectors you are using, and in the case of 24# injectors, a computer from a Cobra can be used as well.
__________________
Good luck!

Brad R.
1992 L.X. 5.0 coupe
MODS: A few little bolt ons
New Best time ...11.60 @ 128 mph @ 2000+ ft altitude.


Rice Haters Club member #39

Users rides #2542
LX5liter is offline   Reply With Quote
Old 08-25-2003, 10:57 AM   #4
vertcrazy
Registered Member
 
Join Date: Aug 2003
Location: Bannister Michigan
Posts: 3
Default

Wow, That is really goofy.I did'nt put that post up but it is under my name.I got an email notification that someone responded to a thread I subscribed too so I checked it out.Maybe one of the other guys got on the computer I was using after I did at school.?? My car is running fine and I don't know where that came from.


James
__________________
1991 5.0 LX Convertible
1991 Z28 Convertible
1968 Chevy 1/2 ton 4X4
vertcrazy is offline   Reply With Quote
Old 08-25-2003, 02:21 PM   #5
Simi Stang
Guest
 
Posts: n/a
Default huh?

Quote:
Originally posted by vertcrazy
Wow, That is really goofy.I did'nt put that post up but it is under my name.I got an email notification that someone responded to a thread I subscribed too so I checked it out.Maybe one of the other guys got on the computer I was using after I did at school.?? My car is running fine and I don't know where that came from.

James
You are now entering the Mustang twilight zone...
  Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Black soot in tail pipes xxxBlakexxx Modular Madness 7 04-18-2004 11:02 PM
How big are the stock tail pipes and how restrictive are they? 96_4.6 Modular Madness 4 12-09-2003 07:41 PM
hlpe smoke form tail pipes james87gt Windsor Power 1 08-22-2003 02:22 AM
Will 99+stang tail pipes fit 96-98?? 96_4.6 Modular Madness 3 09-19-2002 05:50 PM
are mac's 3 1/2 inch tail pipes for my setup Chevysucks Windsor Power 1 03-18-2002 03:46 PM


All times are GMT -5. The time now is 09:15 PM.


SEARCH