Cam

mustangmadman · 08-25-2003, 09:03 PM

ok guys its me again.....i just picked up a B18 cam for my pony....will that work on my engine?? good or bad??

stock block
gt40p heads fully ported
stock u/l intake
70 mm throttle body
cold air intake

its a newly fresh motor everything has been gone throug right down to honing out the cylinder walls and new piston rings.

88workcar · 08-26-2003, 06:57 AM

I do not know the specs on a B18, from what I have heard I think that it is a cam built for a blower. I see that you still have a stock intake. That would be a good investment for you. I have a ported cobra for sale. Also if you have the chance, swap the 70mm for a 65mmTB. Also just for the knowledge you should track test the 70 against the stock one untill you change the intake. You may be surprised. GOOD LUCK

bigred90gt · 08-26-2003, 08:43 AM

Quote:

Originally posted by 88workcar
Also just for the knowledge you should track test the 70 against the stock one untill you change the intake. You may be surprised. GOOD LUCK

I did and didnt loose, or really gain, anything from it. Alot of people said I would loose because of it, but I stayed about the same.

08-25-2003, 09:03 PM	#1
mustangmadman Registered Member Join Date: Aug 2003 Location: rochester, ny Posts: 31	Cam ok guys its me again.....i just picked up a B18 cam for my pony....will that work on my engine?? good or bad?? stock block gt40p heads fully ported stock u/l intake 70 mm throttle body cold air intake its a newly fresh motor everything has been gone throug right down to honing out the cylinder walls and new piston rings.

08-26-2003, 06:57 AM	#2
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	I do not know the specs on a B18, from what I have heard I think that it is a cam built for a blower. I see that you still have a stock intake. That would be a good investment for you. I have a ported cobra for sale. Also if you have the chance, swap the 70mm for a 65mmTB. Also just for the knowledge you should track test the 70 against the stock one untill you change the intake. You may be surprised. GOOD LUCK __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.