? 91 Lx 5.0

five0guy · 08-28-2003, 06:45 PM

Okay, he also has a 91 LX 5.0 which has been
lowered..everything is fine except he had to take away his sway bar because it was either putting pressure on his oil pan or rubbing it or something..does anyone know if he can fabricate the stock sway bar, or is there a company you can buy a special one for a lowered vehicle?? once again, i preciate it..

Fox Body · 08-31-2003, 07:36 PM

How does lowering the car make the sway bar rub the oil pan?

ChunkFunky · 09-01-2003, 10:50 AM

I doubt one could fabricate one.. it's like a tension rod.. it needs to flex and stuff... your best bet, if you want a stock one, would be to go to junk yard...

five0guy · 09-06-2003, 09:40 AM

i dont know how mustangmaniac, all i know is that is it lowered as much as it can be...maybe it only done it when he went around curves or something...i have no idea??? but thanks for the replies...

08-28-2003, 06:45 PM	#1
five0guy work in progress Join Date: Aug 2003 Location: The Mountains Posts: 28	? 91 Lx 5.0 Okay, he also has a 91 LX 5.0 which has been lowered..everything is fine except he had to take away his sway bar because it was either putting pressure on his oil pan or rubbing it or something..does anyone know if he can fabricate the stock sway bar, or is there a company you can buy a special one for a lowered vehicle?? once again, i preciate it..

08-31-2003, 07:36 PM	#2
Fox Body Mustang Maniac Join Date: Sep 2000 Location: GA, U.S.A Posts: 2,266	How does lowering the car make the sway bar rub the oil pan? __________________ 351W-powered 1979 Ford Mustang Ghia notchback '79 Video @ Idle Stock 5.8L under 4" cowl 'glass hood, C4 w/ Transgo shift kit, Holley 750 cfm, Edelbrock Performer RPM intake; Fluidyne Al radiator, Flexalite 175 electric fan, 1 5/8" MAC shorty headers, FRPP Al driveshaft; S&W 6-point cage; 2.5" Off road H-pipe, 2-chamber Flowmasters, 8.8" Rear w/ 3.55s; Weld wheels (15x6;15x8), Front: 225/60/15, Rear: 275/50/15 Nitto NT 555R Drag Radials; 14 x 4” K&N X-stream air filter. '92 GT (5-speed) Small In Car Video Stock 5.0L, 2-chamber Flowmasters, MAC CAI, Tri-Ax, Al pedals... "Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body

09-01-2003, 10:50 AM	#3
ChunkFunky Registered Member Join Date: Apr 2002 Location: Tustin, CA Posts: 465	I doubt one could fabricate one.. it's like a tension rod.. it needs to flex and stuff... your best bet, if you want a stock one, would be to go to junk yard... __________________ '89 GT Convertible: TFS TW Heads, TFS Street Intake, TFS Stage 1 Cam, FMS 1.6 RRs, 24# Injectors, Pro-M 75mm MAF, No Name CAI, 3.73s, O/R H-Pipe, FlowMasters, AOD w/ Trans-Go Shift Kit

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT's Vs. LX 5.0L	88fivepointoh	Windsor Power	16	08-01-2004 08:25 PM
Differences: GT v LX	FiveORookie	Windsor Power	6	10-11-2002 09:43 AM
lx trunk lid???	19907up	Windsor Power	1	08-06-2002 02:45 PM
sedanman vs 11sec LX	sedanman	Stang Stories	3	03-16-2001 12:53 AM
LX 5.0 goes down, followed by Accord? hehe	Unit 5302	Stang Stories	8	02-22-2001 06:16 PM

09-06-2003, 09:40 AM	#4
five0guy work in progress Join Date: Aug 2003 Location: The Mountains Posts: 28	i dont know how mustangmaniac, all i know is that is it lowered as much as it can be...maybe it only done it when he went around curves or something...i have no idea??? but thanks for the replies...