© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
08-06-2003, 05:13 PM | #1 |
Registered Member
Join Date: Jun 2003
Location: Chicago
Posts: 73
|
Powershift in AOD
Can someone please explain to me how to powershift with an AOD
__________________
My Cardomain Website |
08-06-2003, 05:42 PM | #2 |
Sober voice of Reason
Join Date: Nov 1998
Location: Kelowna, B.C., Canada
Posts: 1,514
|
Powershift an AOD? Whoever claimed it could be done is smoking crack
__________________
393W: AFR 205's, hydraulic roller, TKO600. |
08-06-2003, 05:55 PM | #3 | |
Guest
Posts: n/a
|
Re: Powershift in AOD
Quote:
|
|
08-06-2003, 06:27 PM | #4 |
Registered Member
Join Date: Jun 2003
Location: Chicago
Posts: 73
|
I dunno everyone around here talks about powershiftng. My buddy is the one with the AOD and everytime he races people ask me, "Does he know how to powershift?"
__________________
My Cardomain Website |
08-06-2003, 06:54 PM | #5 | |
Guest
Posts: n/a
|
Quote:
So now you can tell them, "No, it's an automatic!" |
|
08-07-2003, 02:10 PM | #6 |
DURKA DURKA!!
Join Date: Sep 1997
Location: Lubbock, TX...(TX panhandle)
Posts: 1,418
|
Yup. No such thing as powershifting an AOD. Maybe they think he has a 5-speed?
Anyway, there is such a thing as the 1-D-1 Shuffle in an AOD. People use it to be able to hold second gear. Many people say it will burn your tranny up, others have used it without any problems. I use to use it on rare occasion when racing. The problem with a stock AOD is that it is inconsistant in the way it shifts, even with the 1-D-1 shuffle. A shift kit helps, but I still had problems until I put in the Lentech valve body. Now it shifts like a dream. --nathan
__________________
'91 GT, Coast 347, 9.5:1 compression, full intake, Wolverine 1087 cam, exhaust, Keith Craft ported Windsor Jr. Irons (235 cfm intake, 195 cfm exhaust), AOD, PI 3500 converter, Lentech valve body, 3.73's (4.10's in the works), and Yokohama ES100's out back. Daily Car: '04 Infiniti G35 Sedan 6MT |
08-07-2003, 09:51 PM | #7 |
Registered Member
Join Date: Apr 2002
Location: Tustin, CA
Posts: 465
|
yeah like the last guy said , it isnt POWER shifting but you can make the tranny shift when you want it to but manualy shifting the automatic.. though the stock AOD is kinda mushy with the shifts if you got a shift kit it would shift quicker and firmer and make the whole process more effective... though with my AOD and a shift kit my car chirps the tires shifting into second... I dont really both manualy shifting. The shift kit is "programmed" to shift at certain points get the one that suits you best
-as
__________________
'89 GT Convertible: TFS TW Heads, TFS Street Intake, TFS Stage 1 Cam, FMS 1.6 RRs, 24# Injectors, Pro-M 75mm MAF, No Name CAI, 3.73s, O/R H-Pipe, FlowMasters, AOD w/ Trans-Go Shift Kit |
08-09-2003, 03:06 PM | #8 |
Registered Member
Join Date: Apr 1999
Location: greenwood, ar
Posts: 118
|
I belive most newer transmissions are electronically controlled which means the shift kit can't effect when it shifts just how hard it shifts. The computer tells the transmission when to shift.
but I don't know when they started going to electronic shifting on the aod's.
__________________
'89 GT K&N, Twisted Wedge heads, TFS intake,FMS 1.7 rockers, Trick Flow stage 1 cam(221*/225* .530in\.542in) , 3.73's, headers, off road H-pipe, Flowmasters, FMS Clutch, Tremec, PRO-5.0, FMS driveshaft, fluidyne alum. radiator, and more to come. |
08-10-2003, 06:15 PM | #9 |
DURKA DURKA!!
Join Date: Sep 1997
Location: Lubbock, TX...(TX panhandle)
Posts: 1,418
|
I do believe the last year for the non-electric AOD was 1993 with the newer trannies starting in 1994.
Anyway, the Lentech VB I run changes the shift pattern from 1-2/3-OD to 1-2-3/electronic OD. You just flip a switch for OD. Full manual or automatic shifting. It's the best way to go, IMO, if you want to run an AOD. --nathan
__________________
'91 GT, Coast 347, 9.5:1 compression, full intake, Wolverine 1087 cam, exhaust, Keith Craft ported Windsor Jr. Irons (235 cfm intake, 195 cfm exhaust), AOD, PI 3500 converter, Lentech valve body, 3.73's (4.10's in the works), and Yokohama ES100's out back. Daily Car: '04 Infiniti G35 Sedan 6MT |
10-19-2003, 01:56 PM | #10 |
Registered Member
Join Date: Jul 2002
Location: watervliet, ny
Posts: 105
|
hey nathan, does that valve body do the same thing as the 1st-2nd-1st shuffle does, or is it different?
|
10-19-2003, 03:28 PM | #11 |
IRAQ VET
Join Date: Feb 2000
Location: high desert California
Posts: 1,480
|
Best way to go with a auto is to get a manule valve body. I put one in my 69 c-6 and it made all the difference in the world. I have a performance automatic manule vavle body to put into my 91 aod car. You shift the car at whatever rpm you want to for 1-2-3 then you flip a switch to go into overdirve. I can't wait to get it into the car i know it will make a huge difference.
__________________
428 Cobra Jet SOHC 5.4 3V F-150 96 mystic cobra 91 GT |
10-21-2003, 06:38 PM | #12 |
Registered Member
Join Date: Jun 2003
Location: MOUNTAINHOME, IDAHO
Posts: 20
|
A little info on this....
I owned an auto 89 GT and I know from personal experience that you can control the shifting of the aod a little. I know that you can make the trans lock into 1st gear by pulling the the shifter all the way to the rear (2nd) and then pushing it back into drive and slamming it back into 2nd quickly. The car will shift down into first and lock there until you shift it back into 2. When its locked in first you can stage and prepare to launch. when you launch the transmission WILL NOT shift into second without you actually shifting it into 2nd. From there you can shift it into drive, and if necessary into OD. The only time it will change gears automatically is when you shift into drive, from there it will act normally unless you repeat the sequence above. I only used the method above when I ran my car at the track. I know that this was the case for both my own and my friends 93 gt. I dont know if I would classify this as a "power shift", but you can control the shift point from 1st to 2nd. My car would hit second hard enough to break the rear tires for 10 ft. It was good enough for me, untill I got my 5 speed 95 gt!
Hope this helps. Matt
__________________
MATT KNIGHT 1995 5.0, msd 6al, msd coil, bbk longtubes, bbk offroad, 2 chamber flows, power tower shift, 98 gt wheels |
10-21-2003, 07:42 PM | #13 | |
Registered Member
Join Date: Jul 2002
Location: watervliet, ny
Posts: 105
|
Quote:
|
|
10-21-2003, 07:58 PM | #14 |
Registered Member
Join Date: Jul 2002
Location: watervliet, ny
Posts: 105
|
Re: A little info on this....
you can make the trans lock into 1st gear by pulling the shifter all the way to the rear (2nd) and then pushing it back into drive and slamming it back into 2nd quickly. The car will shift down into first and lock there until you shift it back into 2.
mattknight, i'm confused. are you saying that if i start with the shifter in 2nd, then shift into drive and immediately shift back into 2nd, i will be in 1st gear, with the indicator on 2nd? it seems to me like it would be alot easier to just have a 5-speed put in. maybe next year. |
10-21-2003, 10:32 PM | #15 |
Registered Member
Join Date: Apr 2002
Location: Tustin, CA
Posts: 465
|
I think he was trying to explain teh AOD shuffle... I'll try it my way
These are the steps in order and what happens.. this is assuming yoru shifter reads, 1, D, OD. SHIFTER IN 1 REV TO WHATEVER YOU WANT AND LAUNCH SHIFT TO D (at whatever RPM you choose) SHIFT BACK TO 1 (this needs to be done right after your shift into 2, This will not shift you back into 1 but will keep the tranny from shifting into 3) SHIFT TO D (at whatever RPM you choose. This will make the tranny shift into third since it's the next gear in the sequence) At this point you're in 3rd gear.. if you want you can put it to OD and get that OD gear.. but it's not good for drag racing... you should be at the end of the track by the time your get to the redline at the top of 3rd... Does that make sense? -as
__________________
'89 GT Convertible: TFS TW Heads, TFS Street Intake, TFS Stage 1 Cam, FMS 1.6 RRs, 24# Injectors, Pro-M 75mm MAF, No Name CAI, 3.73s, O/R H-Pipe, FlowMasters, AOD w/ Trans-Go Shift Kit |
10-22-2003, 01:20 AM | #16 |
Registered Member
Join Date: Sep 2002
Location: IL
Posts: 105
|
Isnt that ruff on the trans??
__________________
89' GT with 5spd Hurst short throw, Keith Black 12:1 comp. pistons, Sealed Power drag racing rings, Fms F303 Cam, Ported and polished upper and lower intake with Ported E7TE heads that contain comp. cam double coiled springs with titainum locks and steel retainers, Fel-Pro Head Gaskets, 9mm ford racing wires, BBK chrome unequal shortys, Power Throttle bodies 70mm, Edlebrock 70mm EGR plate, 15inch K&N, Bassani X-pipe, Flowmaster 40 series, Eibach 1 1/2 lowering springs, Cobra R rims 17X9 with p235 on front and p275 on rear with Falken Zeix tires-RUNNING! |
10-22-2003, 12:59 PM | #17 |
DURKA DURKA!!
Join Date: Sep 1997
Location: Lubbock, TX...(TX panhandle)
Posts: 1,418
|
That's the eternal debate. From what I can gather, it can be harmful on the tranny. Some people blow their tranny the first time they try it. Others do it for years and never have a problem. Anyway, you decide if it's worth the risk. I've used it in the past for racing, but it was still inconsistant, even with the shift kit. The full custom vb is the best way to go.
--nathan
__________________
'91 GT, Coast 347, 9.5:1 compression, full intake, Wolverine 1087 cam, exhaust, Keith Craft ported Windsor Jr. Irons (235 cfm intake, 195 cfm exhaust), AOD, PI 3500 converter, Lentech valve body, 3.73's (4.10's in the works), and Yokohama ES100's out back. Daily Car: '04 Infiniti G35 Sedan 6MT |
10-22-2003, 01:41 PM | #18 | |
Registered Member
Join Date: Mar 2000
Location: Springfield, Ma, usa
Posts: 706
|
Quote:
__________________
NewEngland Auto www.baystategearheads.com -91 Mustang Coupe, ex 4cyl (sold) -99 F150, 3" lift, 35" Procomps, Magnaflow exhaust |
|
10-23-2003, 11:38 AM | #19 |
Registered Member
Join Date: Sep 2002
Location: Boston
Posts: 592
|
So as long as there's a fresh AOD thread running, I'll post my question here instead of opening a new thread but:
Does the redline synthetic make enough of a difference to justify the absurd cost of ...8?... quarts to fill up an AOD? I'm installing it and I have this feeling that I'll need to drain it at least once and tweak it before it will work porperly. What should I be filling it with? ATF of mercronII? it's an 87 non electronic AOD.
__________________
91 GT Carb conversion, holley 600 double pumper, edelbrock performer intake, FMS "C" drop springs, march 1000 underdrive pullies, crane 1.7 roller rockers, GT-40P headers, bassani x pipe, american thunder catback, FMS 4.56's, msd aL6, trunkmount battery, A/C eliminator kit, 3000 stall tci streetfighter, AOD with transgo kit, A+ servo, 300M hardened lockup shaft, kevlar bands and 28,000 gvw trans cooler, 3 core radiator, 300 lbs stripped with a full interior |
10-27-2003, 06:26 PM | #20 |
Registered Member
Join Date: Jun 2003
Location: MOUNTAINHOME, IDAHO
Posts: 20
|
Yeah kinda ....
Yeah, kinda what he said. Only difference was that my car didnt have a 1st gear setting. It was OD, D, 2. The process isnt difficult, just put the gear lever in two, push it up to D and slam it back into 2. This put my car into first gear, and would hold it there untill you shift out of it. My car would shift too early and this was the way that I prevented it. So basically like the guy above my said, only not really!!
Sorry if I confused every one, I am not the best at describing my actions... I'm sure you all will forgive. Matt
__________________
MATT KNIGHT 1995 5.0, msd 6al, msd coil, bbk longtubes, bbk offroad, 2 chamber flows, power tower shift, 98 gt wheels |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Powershift in AOD | 88GT 5pt0 | Stang Stories | 6 | 08-12-2003 02:05 PM |
Powershift | UglyFast88 | Windsor Power | 5 | 06-26-2002 09:26 PM |
Sportbike goes down | exgmguy | Stang Stories | 21 | 04-20-2002 05:58 PM |
Do you really want to powershift? | SlowStang2 | Windsor Power | 14 | 08-30-2001 09:35 PM |
how to powershift an AOD? | 89LXCarb | Stang Stories | 13 | 01-16-2001 05:13 PM |