Intake tube

Scrapla · 11-08-2003, 07:17 PM

I need a intake for my car I already have the TFS upper and lower and 65mm TB I just need a good CAI intake or normal one what are some good ones?

Fox Body · 11-08-2003, 10:12 PM

MAC.

Get the cold air one. Don't waste your money on the one that sits in your engine bay.

billheis · 11-10-2003, 07:35 PM

Look at Anderson Motorsports. They have those power pipes for the blower combos and they also have for N/A. They put the MAF in the fenderwell so you don't have the problems of the air coming around the corner. At least that what they advertise and I've heard others say they work good. Maybe someone else has experience with one. But if I were going t get another (already have MAC in the fender) I'd go with theres. Sorry I don't have the web address handy I'm on the computor at work. (The boss is gone, lol)

11-08-2003, 07:17 PM	#1
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Intake tube I need a intake for my car I already have the TFS upper and lower and 65mm TB I just need a good CAI intake or normal one what are some good ones? __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

11-08-2003, 10:12 PM	#2
Fox Body Mustang Maniac Join Date: Sep 2000 Location: GA, U.S.A Posts: 2,266	MAC. Get the cold air one. Don't waste your money on the one that sits in your engine bay. __________________ 351W-powered 1979 Ford Mustang Ghia notchback '79 Video @ Idle Stock 5.8L under 4" cowl 'glass hood, C4 w/ Transgo shift kit, Holley 750 cfm, Edelbrock Performer RPM intake; Fluidyne Al radiator, Flexalite 175 electric fan, 1 5/8" MAC shorty headers, FRPP Al driveshaft; S&W 6-point cage; 2.5" Off road H-pipe, 2-chamber Flowmasters, 8.8" Rear w/ 3.55s; Weld wheels (15x6;15x8), Front: 225/60/15, Rear: 275/50/15 Nitto NT 555R Drag Radials; 14 x 4” K&N X-stream air filter. '92 GT (5-speed) Small In Car Video Stock 5.0L, 2-chamber Flowmasters, MAC CAI, Tri-Ax, Al pedals... "Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body

11-10-2003, 07:35 PM	#3
billheis Registered Member Join Date: May 2001 Location: Fernandina Beach, FL 32034 Posts: 178	Look at Anderson Motorsports. They have those power pipes for the blower combos and they also have for N/A. They put the MAF in the fenderwell so you don't have the problems of the air coming around the corner. At least that what they advertise and I've heard others say they work good. Maybe someone else has experience with one. But if I were going t get another (already have MAC in the fender) I'd go with theres. Sorry I don't have the web address handy I'm on the computor at work. (The boss is gone, lol) __________________ Bill Heiser 90 Convertable 5.0 LX, ported E7s w/ THumper valve job, TFS street, FR 65mm TB, B cam w/1.7 cobra rockers, kirban AFPR, Mac CAI, Mac Headers, off road h, 3 chamber flows, Crane ign. box, 3:73s, Art Carr AOD & 2600 converter

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Intake with NITROUS!!!????	NOSstang08690	Power Adders	9	09-09-2003 07:05 AM
intake	ghostfacedriver	Blue Oval Lounge	1	08-26-2003 07:16 AM
Explore intake???????????	William Bowers	Windsor Power	2	02-14-2002 10:27 PM
HELP!!! oil in intake, what to do??	bosco	Windsor Power	4	02-03-2002 05:02 PM
Edelbrock spec's and intake question??	jerryIII	Windsor Power	0	05-24-2001 12:49 PM