© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
11-14-2003, 08:10 PM | #1 |
Registered Member
Join Date: Sep 2000
Location: southern california
Posts: 329
|
t-5 rebuild. self or not
I have a t-5z that needs rebuilt. THe only problem is that it wont stay in second gear and sometimes grinds slightly into 5th. Sounds to me like a synchro-only problem what do you think? With the costs of a a shops rebuild it almost sounds better to buy a new one, neither of which I want to spend the money on though. If i was to spend that much money again then I would rather have it be tward a tremec but I dont want to do that yet either. It seems the best decision to tackle the tranny myself. Who has done this before? WHat are some of the things I may need as far as tools?
I consider myself fairly well mechanically inclined. Ive swapped out the aod for the 5-speed myself also replaced heads etc.
__________________
1987 black with t-tops. Cobra intake, 1.7 cobra crane rollers, gt40p's, bbk shorties, off road h-pipe, Holley adj. fuel pressure regulator, Tremec t-5z, 65mm TB, 4.10's, adj cable, 155lph fuel pump, Ram clutch kit, 3 row motorsport radiator, Chrome cobras17x9 front, 17x10.5 rear, Hurst shifter,Former AOD Semper Fi |
11-14-2003, 10:24 PM | #2 |
Registered Member
Join Date: Sep 2002
Location: Boston
Posts: 592
|
In my time, I have rebuilt 2 engines and 1 AOD in my basement and installed my own gears, so I consider myself to be a decently "seasoned" verteran of mechanical affairs and I found the T-5 rebuild to be extremely difficult. The case is dominated by snaprings and each set of gears on the cluster needs to have a certaibn preload. Compared to this, the AOD rebuild was a cakewalk. It's not difficult but it requires a few relatively special tools (snapring plyers are an absolute must) and lots of precision work otherwise you end up with something that shifts exactly as bad or worse than before the rebuild. Get a "professionally rebuilt" one. The parts yard near here sells them for about 800 bucks which totally beats the 2200 aamco want to charge for a rebuild of a t-5
__________________
91 GT Carb conversion, holley 600 double pumper, edelbrock performer intake, FMS "C" drop springs, march 1000 underdrive pullies, crane 1.7 roller rockers, GT-40P headers, bassani x pipe, american thunder catback, FMS 4.56's, msd aL6, trunkmount battery, A/C eliminator kit, 3000 stall tci streetfighter, AOD with transgo kit, A+ servo, 300M hardened lockup shaft, kevlar bands and 28,000 gvw trans cooler, 3 core radiator, 300 lbs stripped with a full interior |
11-15-2003, 11:45 AM | #3 |
Registered Member
Join Date: May 2002
Location: The Midwest
Posts: 79
|
It is actually not that bad to rebuild yourself. If it won't stay in second gear, the 1-2-R slider may have all the clutch teeth torn up. Taking off snap rings is easy if you have snap-ring pliers! Some of the gears on the main shaft may need to be pressed off, but any automotive machine shop could do that fast and easy. If you get the T-5 manual (and I have also heard that the Hanlon rebuild video really helps), you'll find it easier than you think. Just get the case open to see what you might need to replace and stay organized with all the small parts. Mine has shifted fantastic since I rebuilt it!
|
11-17-2003, 11:45 AM | #4 |
Mizzou Tigers
Join Date: Apr 1999
Location: weston, MO United States
Posts: 1,455
|
I replaced my 2nd gear synchro several years back and didn't find it to be overly difficult. I did have the help of my step-dad though, who is very good with all things mechanical. As said before, you'll need snap ring pliers and a shop to press some of the gears off. A good manual will show how everything kind of goes together. Just make sure and to keep tack of the order that everything slides off the shafts and things shouldn't be too bad.
Also, I can't remember where it was exactly, but somewhere there is a little steel ball that is loaded by a spring. Like I said, I don't remember where it went, but when I disassmebled that part, that ball went flying across the garage and took forever to find. Maybe the manual shows where that is.....it has been a few years since I was in the inside of one. Some may say it is more difficult than I thought it was, but mine has shifted fine every since. Maybe I just got lucky?
__________________
2006 Mustang GT 1990 LX GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved) 1998 Contour SVT Rice Haters Club Member #244 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
rebuild or not to rebuild??? | NotchStang59311 | Windsor Power | 9 | 04-14-2004 05:28 PM |
T-5 Rebuild | 95/GT/5.0 | Windsor Power | 9 | 12-26-2002 10:23 PM |
TRANS rebuild kits for 5spd | drtbiker | Windsor Power | 3 | 08-18-2002 04:25 PM |
Low cost rebuild. | salcmc | Classic Mustangs | 3 | 09-11-2001 09:16 PM |
advise on T-5 rebuild | 429mustang | Blue Oval Lounge | 0 | 07-23-2001 01:51 PM |