Converting from Pedestal to Stud mount

You'll need stud mounted rockers of course along with guide plates and hardened pushrods. Studs for SBF are usually either 7/16 or 3/8. 3/8 will work for most mild to moderate applications, but 7/16 are stronger and more stable for high HP applications. You'll have to have the heads machined to accept the studs. There are cheap, bolt-on conversions, but a true stud setup is the only way to go.

------------------
Jeff Chambers
T/S #3
11.462 Seconds/117.43 MPH
Chambers Racing Team