guys help with my door???

90dpscoupe · 08-19-2001, 09:40 PM

on my stang, i cant explain too well, but here goes,

on my passenger side door the little thing (post) is what i want to call it, where the door strike grabs to hold the door shut, well the little black plastic thing is broke on it, so now it has play in it, and rattles when i go over bumps? my question is, where can i get these? i looked at o-reilley and autozone, didnt really ask the workers, being i cant seem to get any service anyway.

I noticed my friends 85 dont even have these, but i need one. thnx for replies..

------------------
90 lx coupe:5spd, 176k miles, steeda water pump pulley, Mac cold air fenderwell, Mac h-pipe, supercoil, ADS chip, aluminum D/S, Black magic fan, 3.27grs.
Best time: 13.9116(on 225/60/15 firehawks)
Best mph: 98.17
Best 60': 1.9607

next mods:4.10's

Fox Body · 08-19-2001, 09:46 PM

JUNK YARD

-----------------------------------------
351W-powered 1979 Ford Mustang notchback
Stock 5.8L under 4" cowl, C4 w/ shift kit
Holley 750 cfm, Edelbrock Performer RPM intake
1 5/8" MAC shorty headers, Al driveshaft
2.5" Off road H-pipe, 2-chamber Flowmasters
Front: 225/60/15, Rear: 255/60/15 Eagle GT II
Weld wheels (15x6;15x8), 8.8" Rear w/ 3.55s
14 x 4” K&N air filter (getting the Xtreme setup someday)

"Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body

Five0 · 08-19-2001, 10:09 PM

I think they are called strikers and you can get them from the ford dealership.

If I remember correctly they go for about 17 dollars each but come with the bolt and bracket.
I tried to get mine without the bolt and bracket and they said they don't come like that, you have to buy the whole thing.

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
12.565 @109.38mph 1.764 60ft

90dpscoupe · 08-19-2001, 10:31 PM

damn! well i guess it'll have to be that way then, does it just screw out? star wrench?
17$ geez thnx guys

undrdog · 08-20-2001, 03:32 PM

I've seen them at PEP BOYS also, under the "HELP" brand name of parts. Not sure of the cost though. I believe there is some adjustment on these so try to make a mark where the old one is before you remove it.

08-19-2001, 09:40 PM	#1
90dpscoupe Registered Member Join Date: Jun 2000 Location: sanantonio, Tx, usa Posts: 1,407	guys help with my door??? on my stang, i cant explain too well, but here goes, on my passenger side door the little thing (post) is what i want to call it, where the door strike grabs to hold the door shut, well the little black plastic thing is broke on it, so now it has play in it, and rattles when i go over bumps? my question is, where can i get these? i looked at o-reilley and autozone, didnt really ask the workers, being i cant seem to get any service anyway. I noticed my friends 85 dont even have these, but i need one. thnx for replies.. ------------------ 90 lx coupe:5spd, 176k miles, steeda water pump pulley, Mac cold air fenderwell, Mac h-pipe, supercoil, ADS chip, aluminum D/S, Black magic fan, 3.27grs. Best time: 13.9116(on 225/60/15 firehawks) Best mph: 98.17 Best 60': 1.9607 next mods:4.10's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Door handle woes	relliott	Windsor Power	4	10-21-2001 01:01 PM
Door hinge tip.........lessons learned, hard way	hubiev_89lx	Windsor Power	5	09-03-2001 05:18 PM
?s about door handles.	Stampede	Windsor Power	2	05-27-2001 06:35 PM
inside door handle	DemonGT	Windsor Power	1	05-04-2001 12:34 AM
Repro Door gaskets any good???????	Chevyguy	Windsor Power	1	04-19-2001 09:22 PM

08-19-2001, 09:46 PM	#2
Fox Body Mustang Maniac Join Date: Sep 2000 Location: GA, U.S.A Posts: 2,266	JUNK YARD ----------------------------------------- 351W-powered 1979 Ford Mustang notchback Stock 5.8L under 4" cowl, C4 w/ shift kit Holley 750 cfm, Edelbrock Performer RPM intake 1 5/8" MAC shorty headers, Al driveshaft 2.5" Off road H-pipe, 2-chamber Flowmasters Front: 225/60/15, Rear: 255/60/15 Eagle GT II Weld wheels (15x6;15x8), 8.8" Rear w/ 3.55s 14 x 4” K&N air filter (getting the Xtreme setup someday) "Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body

08-19-2001, 10:09 PM	#3
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	I think they are called strikers and you can get them from the ford dealership. If I remember correctly they go for about 17 dollars each but come with the bolt and bracket. I tried to get mine without the bolt and bracket and they said they don't come like that, you have to buy the whole thing. ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX 12.565 @109.38mph 1.764 60ft

08-19-2001, 10:31 PM	#4
90dpscoupe Registered Member Join Date: Jun 2000 Location: sanantonio, Tx, usa Posts: 1,407	damn! well i guess it'll have to be that way then, does it just screw out? star wrench? 17$ geez thnx guys

08-20-2001, 03:32 PM	#5
undrdog Registered Member Join Date: Apr 1999 Location: Pittsburgh, Pennsylvania Posts: 73	I've seen them at PEP BOYS also, under the "HELP" brand name of parts. Not sure of the cost though. I believe there is some adjustment on these so try to make a mark where the old one is before you remove it.