
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
#11 |
|
Registered Member
Join Date: Aug 2001
Location: Valdosta, GA--USA
Posts: 4
|
If none of things that you try work then look for this. I own a 95 GT and haven't really got into the workings of the computer, but I also own a 87 plymouth voyager and it had the same exact problem that you are discribing. It's problem was the vacum line going to the MAP sensor. The Map sensor reads barimetric pressure of the air to determine the correct fuel air mixture. so it could be bad, cracked vacumm line or your fuel pump could be pushing to hard and its not getting the right amount of air to burn correctly. You could try and put a pressure regulator with PSI gauge on the fuel line and start downing the fuel pressure to see if you can find the happy medium..hope this helps you out
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| eibach advice needed | mustardjohn | Small Ponies | 6 | 08-19-2012 08:12 PM |
| Advice on injectors...PKRWUD I'd like your advice on this one as well | silver_pilate | Windsor Power | 3 | 06-09-2003 08:59 AM |
| building a stroker need advice on solid roller or hydrallic roller cam ?? | Mustangboy89 | Windsor Power | 4 | 06-06-2003 02:10 PM |
| Need advice for troublesome 70 Mustang. | wolfman | Classic Mustangs | 1 | 06-12-2001 08:19 AM |
