New BBK Intake

88workcar · 03-02-2004, 07:33 AM

Do any of you-all have pics and or specs on the new BBK intake?

302 LX Eric · 03-02-2004, 09:50 AM

There was a quick write-up (a few sentences) about it in the SEMA coverage section in MM&FFs most recent issue.

Hope this helps,
E

tireburner163 · 03-02-2004, 10:14 AM

I saw a little about it. It's still in the development stage. There aren't any flow numbers are anything like that out yet.

-Josh, aka the tireburner

88workcar · 03-02-2004, 06:18 PM

yall know as much me

Lethal5Oh · 03-05-2004, 09:01 PM

5.0 and SF had an article on it. No flow numbers as of yet due to BBK is still in the process of designing the upper intake (which is supposed to resemble the newer 3.8 intakes) BBK is saying a selling price of $400 with new fuel rails designed specificaly to fit with the new intake. I know im definetly going to wait for it to come out sometime early summer before i buy any other intake.

tireburner163 · 03-08-2004, 08:18 AM

At a recent SCCA race a member/friend of mine managed to snap a few pictures of a BBK prototype intake that was being used on one of BBK's cars. Perhaps this is the new upper??? I have no clue, but I'll get the pics up as soon as I can.

-Josh, aka the tireburner

Stang_Crazy · 03-08-2004, 08:31 PM

Pics can be seen here: http://www.superchargerhelp.com/showthread.php?t=4470

429mustang · 03-08-2004, 10:01 PM

Any idea when it's coming out ??? I was gonna get a trickflow, but those look pretty sweet so I'd rather wait if it'll be soon. Any info on rpm range/etc.?

Lethal5Oh · 03-08-2004, 11:12 PM

according to 5.0 mustang and super fords, sometime early this summer. At only 400 buck with new fuel rails, to H*** with any other intake. Ill definetly wait for this one.

jonnyk · 03-09-2004, 03:29 PM

I'm curious to see the fuel rails are any better than stock.

If they are, I'll be buying one too.

429mustang · 03-09-2004, 08:17 PM

I tried e-mailing BBK about the intake/specs, they only said it would be out in a few months and it would be like none of the other intakes out now. I wish I knew more about it so I could figure out wether or not to wait, I'll be pissed if it's not what I'm looking for as far as matching it to the cam/head combo I was looking to get.

03-02-2004, 07:33 AM	#1
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	New BBK Intake Do any of you-all have pics and or specs on the new BBK intake? __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

03-02-2004, 09:50 AM	#2
302 LX Eric or '331 LX Eric' Join Date: Jan 1999 Location: Columbus, Ohio Posts: 2,142	There was a quick write-up (a few sentences) about it in the SEMA coverage section in MM&FFs most recent issue. Hope this helps, E __________________ 1991 5.0 LX Coupe - 40,750 miles 331 cu. in. / Tremec 3550 / BFG Drag Radials 12.22 @ 114.31 mph - w/1.89 60'

03-02-2004, 10:14 AM	#3
tireburner163 It's a lot like a race car Join Date: Aug 2000 Location: Meridian, MS Posts: 4,130	I saw a little about it. It's still in the development stage. There aren't any flow numbers are anything like that out yet. -Josh, aka the tireburner __________________ 1987 Buick T-type 1998 HD Electra Elide

03-02-2004, 06:18 PM	#4
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	yall know as much me __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

03-05-2004, 09:01 PM	#5
Lethal5Oh Registered Member Join Date: Jun 2002 Location: Portage Posts: 239	5.0 and SF had an article on it. No flow numbers as of yet due to BBK is still in the process of designing the upper intake (which is supposed to resemble the newer 3.8 intakes) BBK is saying a selling price of $400 with new fuel rails designed specificaly to fit with the new intake. I know im definetly going to wait for it to come out sometime early summer before i buy any other intake. __________________ '95 GT convert. K&N, C&L mass air meter, Performance distributors sreamin demon coil, dyna mod, live wires, king cobra clutch, flowmaster american thunder exhaust, UPR billet adjustable shift handle, Crane Cams Fireball HI-6 box,underdrive pullies, 255lph fuel pump, UPr short throw shifter, caster camber plates, 03 cobra lower A arms, bullit suspension, cobra front brakes

03-08-2004, 08:18 AM	#6
tireburner163 It's a lot like a race car Join Date: Aug 2000 Location: Meridian, MS Posts: 4,130	At a recent SCCA race a member/friend of mine managed to snap a few pictures of a BBK prototype intake that was being used on one of BBK's cars. Perhaps this is the new upper??? I have no clue, but I'll get the pics up as soon as I can. -Josh, aka the tireburner __________________ 1987 Buick T-type 1998 HD Electra Elide

03-08-2004, 08:31 PM	#7
Stang_Crazy It's never clean enough! Join Date: Jan 1999 Location: Shaler, PA Posts: 1,542	Pics can be seen here: http://www.superchargerhelp.com/showthread.php?t=4470 __________________ ~Dan 2001 SVT Lightning 89' GT : Taking up garage space and waiting for a buyer... Rice Hater's Club - Member #11

03-08-2004, 10:01 PM	#8
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	Any idea when it's coming out ??? I was gonna get a trickflow, but those look pretty sweet so I'd rather wait if it'll be soon. Any info on rpm range/etc.? __________________ 1990 Notchback: BBK Ceramic Coated Full length headers, Dr. Gas 3"- 2 1/2" x-pipe, Flowmaster 40's/turndowns.

03-08-2004, 11:12 PM	#9
Lethal5Oh Registered Member Join Date: Jun 2002 Location: Portage Posts: 239	according to 5.0 mustang and super fords, sometime early this summer. At only 400 buck with new fuel rails, to H*** with any other intake. Ill definetly wait for this one. __________________ '95 GT convert. K&N, C&L mass air meter, Performance distributors sreamin demon coil, dyna mod, live wires, king cobra clutch, flowmaster american thunder exhaust, UPR billet adjustable shift handle, Crane Cams Fireball HI-6 box,underdrive pullies, 255lph fuel pump, UPr short throw shifter, caster camber plates, 03 cobra lower A arms, bullit suspension, cobra front brakes

03-09-2004, 03:29 PM	#10
jonnyk Being stroked is great Join Date: Oct 1998 Location: Alberta, Canada Posts: 772	I'm curious to see the fuel rails are any better than stock. If they are, I'll be buying one too. __________________ Novi 2000 now spinning off the snout of the 331... Mods Pics

03-09-2004, 08:17 PM	#11
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	I tried e-mailing BBK about the intake/specs, they only said it would be out in a few months and it would be like none of the other intakes out now. I wish I knew more about it so I could figure out wether or not to wait, I'll be pissed if it's not what I'm looking for as far as matching it to the cam/head combo I was looking to get. __________________ 1990 Notchback: BBK Ceramic Coated Full length headers, Dr. Gas 3"- 2 1/2" x-pipe, Flowmaster 40's/turndowns.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Explore intake???????????	William Bowers	Windsor Power	2	02-14-2002 10:27 PM
HELP!!! oil in intake, what to do??	bosco	Windsor Power	4	02-03-2002 05:02 PM
Edelbrock spec's and intake question??	jerryIII	Windsor Power	0	05-24-2001 12:49 PM
OIL IN INTAKE almost sure from 'pcv'	QUIN	Windsor Power	8	03-09-2001 01:58 PM
Is the true about Edelbrock heads with TFS intake?	gt93mustang	Windsor Power	14	03-06-2001 07:01 PM