who makes the best, lightest k-member

84gt347 · 03-03-2004, 05:05 PM

and what springs to help my stang leave hard

drudis · 03-05-2004, 08:52 AM

D&D makes the chromoly ones.

I went with the roadrace heavy duty ones from Girggs Racing:

84gt347 · 03-05-2004, 02:54 PM

i wondered if they were actually chromoly

Mike93GT · 03-05-2004, 05:31 PM

I heard that chromoly is not the best shoice for the street since it is so stiff and can break. I went with the QA1/HAL Kmember, and it fit great. It's one of the lowest priced, and I had heard good things about it from everyone before I bought it. It also comes with spring perches if you don't want to use coilovers.

jonnyk · 03-06-2004, 12:46 AM

PA Racing or AJE.

DirtKing · 03-11-2004, 01:12 PM

it depends what you want your k member for. If you purely drag race go with a cheap d&d or one of the other drag models. If you still heavily drive on the street or want to hammer the twisties go with:

1. Maximum Motorsports
2. Griggs
3. Kenny Brown

These Kmembers will run a little heavier, but WILL last a lifetime under extreme abuse!

03-03-2004, 05:05 PM	#1
84gt347 Registered Member Join Date: Mar 2002 Location: sherwood Forest Posts: 291	who makes the best, lightest k-member and what springs to help my stang leave hard __________________ 84 gt350 89 lx vert 92 lincoln lsc. All Forced ( one way or another)

03-05-2004, 08:52 AM	#2
drudis Moderator Join Date: Dec 1999 Location: Livonia, MI, USA Posts: 1,194	D&D makes the chromoly ones. I went with the roadrace heavy duty ones from Girggs Racing: __________________ Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com

03-05-2004, 02:54 PM	#3
84gt347 Registered Member Join Date: Mar 2002 Location: sherwood Forest Posts: 291	i wondered if they were actually chromoly __________________ 84 gt350 89 lx vert 92 lincoln lsc. All Forced ( one way or another)

03-05-2004, 05:31 PM	#4
Mike93GT Registered Member Join Date: Feb 2004 Location: WI Posts: 22	I heard that chromoly is not the best shoice for the street since it is so stiff and can break. I went with the QA1/HAL Kmember, and it fit great. It's one of the lowest priced, and I had heard good things about it from everyone before I bought it. It also comes with spring perches if you don't want to use coilovers. __________________ 93 GT-11.8@116

03-06-2004, 12:46 AM	#5
jonnyk Being stroked is great Join Date: Oct 1998 Location: Alberta, Canada Posts: 772	PA Racing or AJE. __________________ Novi 2000 now spinning off the snout of the 331... Mods Pics

03-11-2004, 01:12 PM	#6
DirtKing Registered Member Join Date: Feb 1999 Location: brooklyn center,mn,USA Posts: 169	it depends what you want your k member for. If you purely drag race go with a cheap d&d or one of the other drag models. If you still heavily drive on the street or want to hammer the twisties go with: 1. Maximum Motorsports 2. Griggs 3. Kenny Brown These Kmembers will run a little heavier, but WILL last a lifetime under extreme abuse! __________________ 88LX notch, Speedpro EFI 358windsor 11.2 to 1 compression, 5 lug baer claws all around..g force t5 and 3.55 gears. rwhp soon to come. Oh yeah...92 octane NO detonation.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K Member	65,dohc,project	Classic Mustangs	0	10-06-2004 03:27 PM
Need help from someone with a groundpounder k member	ciara	Windsor Power	1	04-10-2004 10:55 PM