need quick reply on injector ?

whytry89 · 03-15-2004, 04:26 PM

i found a deal on used 30lb injectors and a maf flow that calibrated for it but the injectors are missing the caps are they hard to find is that a bad sign are they red how dod u tell there 30lb and whats the biggeet maf to go with it the kid though he said it was 83 i think thats big the guys coming tonight so i need to find out both for $120

stang_racer20 · 03-15-2004, 07:53 PM

not sure about the caps. call your local parts store to see if you can buy new caps. yes 30's are red. are talkin 83mm? how much hp are you running? $120 for both? As long as you know they still work well $120 is a great deal.

Hethj7 · 03-15-2004, 09:25 PM

Don't you get those caps in that little rebuild kit for the injectors (the one with the new o-rings and stuff)

? I can't remember, it has been several years since I did that. If that is the case though, that kit is only 2-3 bucks for each injector.

03-15-2004, 04:26 PM	#1
whytry89 Registered Member Join Date: Mar 2004 Posts: 8	need quick reply on injector ? i found a deal on used 30lb injectors and a maf flow that calibrated for it but the injectors are missing the caps are they hard to find is that a bad sign are they red how dod u tell there 30lb and whats the biggeet maf to go with it the kid though he said it was 83 i think thats big the guys coming tonight so i need to find out both for $120

03-15-2004, 07:53 PM	#2
stang_racer20 Registered Member Join Date: Jun 2003 Location: Wisconsin Posts: 348	not sure about the caps. call your local parts store to see if you can buy new caps. yes 30's are red. are talkin 83mm? how much hp are you running? $120 for both? As long as you know they still work well $120 is a great deal. __________________ 92 Mustang GT, 347 Stroker(Forged Steel Crank/Rods-Balanced, Forged Aluminum Dished Pistons), Trick Flow Track Heat Intake, Trick Flow Twisted Wedge Heads w/ Stage 3 port/polish, 80mm C&L MAF, FMS 30# Inj., BBK AFPR, Trick Flow Stage 2 Cam, Trick Flow 1.6R Rockers, BBK E.L. Headers, Flowmaster Cat-Back, MAC CAI, FMS Pulleys, Griffin Alum. Radiator, MSD Pro-Billet Distributor; AOD, Dynamic 3300 Lockup Converter, B & M Super Cooler, B&M Ratchet Shifter; 3:73 gears.

03-15-2004, 09:25 PM	#3
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	Don't you get those caps in that little rebuild kit for the injectors (the one with the new o-rings and stuff)? I can't remember, it has been several years since I did that. If that is the case though, that kit is only 2-3 bucks for each injector. __________________ 2006 Mustang GT 1990 LX GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved) 1998 Contour SVT Rice Haters Club Member #244

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
God bless quick reply	tireburner163	Blue Oval Lounge	4	10-21-2004 04:28 PM
Need quick reply.... C/C plate install	DZEE'S LX	Windsor Power	1	04-06-2002 08:54 PM
Should I Retard My Timing??? (Quick, But Important, Please Reply Soon)	BowTie Eater 5 Liter	Windsor Power	3	02-20-2002 12:51 PM
Experienced Fuel Injector harness question	Stang_ROTY	Windsor Power	5	07-19-2001 11:46 PM