MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 02-03-2004, 11:38 PM   #1
skiwesser
Registered Member
 
skiwesser's Avatar
 
Join Date: Sep 2000
Location: rock hill,S.C. 29730
Posts: 420
Default EGR question

I have my EGR valve disabled (block off in upper intake), I did this at the same time I installed an off road H-pipe, If I a re-enable the EGR system will it cut down on some of the exhaust smell? I figure it's all because of no cats but it smells kinda like gas, would this help any?
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.

DYNO TUNED TO 300.97 RWHP 337RWTQ
skiwesser is offline   Reply With Quote
Old 02-04-2004, 11:20 AM   #2
mustangman4
Registered Member
 
mustangman4's Avatar
 
Join Date: Feb 2003
Location: Oshkosh WI
Posts: 69
Default

Try more fuel at idle. Do you feel like your eyes are burning?
__________________
93 GT 306 DSS, O-Ringed, AFR 185's, Pro Products Intakes, 55lb low imp inj, 80mm Pro-M meter, 2004 PMS, AFM Power Pipe, Kirban Reg, Vortech S-Trim 14lbs. No times yet. Trying to tune.
mustangman4 is offline   Reply With Quote
Old 02-04-2004, 01:43 PM   #3
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default

Get an adjusable fuel pressure regulator and lean it out.

If your car is still speed density this is a common problem. The adustable fuel pressure regulator should fix it.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 02-09-2004, 12:18 AM   #4
84LX89GT
Mustangs
 
84LX89GT's Avatar
 
Join Date: Jul 2000
Posts: 1,938
Default

Your car probably runs rich anyway, and without those mini "incinerators" in your exhaust you will smell more unburnt fuel than normal.
__________________
2005 Suzuki Hayabusa GSX1300-R

1980 Ford Thunderbird - 255 V8
ported heads, 5.0L ported stock headers, O.R. H-pipe and Flowmaster 2-chambers, dual roller timing chain
hi-po Mack Truck hood emblem

1985 Mustang GT 5.0L T5, F-303, GT40p, headers, off-road h, flowmasters, MSD stuff, etc.

Sold 02/06/04
1989 Mustang GT ET: 13.304@102.29 mph (5-24-03)

Sold - 1998 Mustang Cobra coupe, 1/4 mile - street tires: 13.843@103.41 (bone stock)
84LX89GT is offline   Reply With Quote
Old 03-25-2004, 11:01 PM   #5
skiwesser
Registered Member
 
skiwesser's Avatar
 
Join Date: Sep 2000
Location: rock hill,S.C. 29730
Posts: 420
Default

lean it to what PSI?
I'm running 37psi at idle now
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.

DYNO TUNED TO 300.97 RWHP 337RWTQ
skiwesser is offline   Reply With Quote
Old 03-26-2004, 12:39 AM   #6
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default

If you are running 37 WOT fuel pressure then that should be lean enough.

I blocked off my EGR and my car runs rich at an idle also. I just live with it.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 03-26-2004, 01:04 AM   #7
skiwesser
Registered Member
 
skiwesser's Avatar
 
Join Date: Sep 2000
Location: rock hill,S.C. 29730
Posts: 420
Default

I assume WOT fuel press is the same as with the vac line off regulator, thats how i set it 37psi ai idle w/vac line off.
Thanks
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.

DYNO TUNED TO 300.97 RWHP 337RWTQ
skiwesser is offline   Reply With Quote
Old 03-26-2004, 01:00 PM   #8
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default

Quote:
Originally posted by skiwesser
I assume WOT fuel press is the same as with the vac line off regulator, thats how i set it 37psi ai idle w/vac line off.
Thanks
Yes that is correct.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Another tire question 96Saleen Modular Madness 6 02-10-2004 05:27 PM
A stupid question I hate asking about exhaust sound jwboner Windsor Power 4 08-05-2003 05:55 PM
simple question Lonzo Classic Mustangs 3 09-10-2002 09:37 AM
Question about 2002 Ford Mustang Cd Deck nissanNICK Windsor Power 0 03-07-2002 10:08 PM
Newby here, I have a question on Odometers mustangmama Blue Oval Lounge 3 03-03-2001 06:43 AM


All times are GMT -5. The time now is 08:35 AM.


SEARCH