© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
05-30-2004, 07:52 PM | #1 |
Registered Member
Join Date: Nov 2003
Location: Rhode Island
Posts: 11
|
What is a good cam for a 94 gt auto w/ 410's
I have a 94 GT with cold air, pulleys, H pipe, catback, 410's, and a built AODE.
I also have a ZEX dry kit with a 75hp shot set up right now. I am looking for a good cam for my set up. I am also going to put GT40P heads on at the same time of the cam install. Thanks for any help... Chime in if you can help on anouther post I have going. Below-> Stock 94 gt how much (Nitrous) can it handle? Hey guys, I need some info. before I possible go off the deep end...?... I have a 94 GT with cold air, pulleys, H pipe, catback, 410's, and a built AODE. I also have a ZEX dry kit with a 75hp shot set up right now. It worked great for awhile now, I would say I am in the mid to low 13's right now. My base timing is set at 10 degrees and I have 2 heat range cooler plugs in. My question is, What is safe for my stock motor with 75k on it to handle for nitrous? I am going to the track in a few days and I want to use the 100hp shot atleast. I would like to use the 125hp but I heard sometthing about the pistons they put in the 94 and 95's not going good with nitrous. Any info. would be very helpful. Thanks...
__________________
Street car - 87 Gt S/C 490 RWHP. Daily driver - 94 GT Bottle fed... |
05-31-2004, 04:06 AM | #2 |
Moderator
Join Date: Sep 1998
Location: Grand Rapids, Michigan, USA
Posts: 1,001
|
Moved to the Windsor Power Forum
__________________
Capri306, Moderator The Mustang Works Online 1979 Mercury Capri 1987 5.0L Mustang LX Notchback 1993 5.8L Eddie Bauer Bronco |
05-31-2004, 05:13 PM | #3 |
I'm slow ...I know.
Join Date: Dec 2003
Location: houston
Posts: 518
|
be a man and go X cam ..nah j/k i think the popular cam of choice would be the E cam and isnt a stock 5.0 block supposed to take something of around a 150 shot? i wouldnt go 150 but i think 100 would be fine if u got a fuel solenoid to convert it to wet shot
|
05-31-2004, 05:42 PM | #4 |
Registered Member
Join Date: Nov 2003
Location: Rhode Island
Posts: 11
|
x cam
I have an X cam right here in my room out of my 87 gt I took it out when I installed my F .T .I. blower cam.
I am probably gonna shoot the 100 shot and set my timing at 8...
__________________
Street car - 87 Gt S/C 490 RWHP. Daily driver - 94 GT Bottle fed... |
05-31-2004, 10:03 PM | #5 |
I'm slow ...I know.
Join Date: Dec 2003
Location: houston
Posts: 518
|
well the x cam supposedly loves nitrous (i dont know how true this is) and id set the timing at 6.. just my .02 tho :/ with my setup i got the msd timing controller and i can just retard from inside the car when i spray pretty neat lil thing it is
|
06-01-2004, 11:34 AM | #6 |
It's a lot like a race car
Join Date: Aug 2000
Location: Meridian, MS
Posts: 4,130
|
I would suggest a TFS #1 cam.
A lot of people say that you can't run as much nitrous on a 93+ 5.0 because they don't have forged pistons like the 87-92 cars did. The hyper pistons with handle just much nitrous as forged pistons, it's just that they aren't nearly as resistant to detonation. The stock fuel pump is good to about 100hp with a dry kit. With a aftermarket 190lph or up pump I still woulnd't spray more than a 125hp dry shot. However with a good fuel pump I wouldn't be scared to spray a 150hp shot on it. I've got a 150 hp wet shot on my notch and I love it. -Josh, aka the tireburner
__________________
1987 Buick T-type 1998 HD Electra Elide |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Are these good time in the 1/8th...98 auto | Modmadness01 | Modular Madness | 5 | 07-13-2002 02:16 PM |
Any good auto classified...... | Atari | Windsor Power | 3 | 03-31-2002 08:13 PM |
1st time at track with 99 GT auto | 91LX2Bfast | Modular Madness | 0 | 03-29-2002 01:12 PM |
86 GT Wondering good performance? | Back Seat Driver | Blue Oval Lounge | 14 | 11-06-2001 01:59 PM |
99 GT, auto tranny rebuild | red99stang | Modular Madness | 5 | 05-22-2000 03:37 AM |