Air Ride

FiveOismylife · 06-01-2004, 07:56 PM

What are your thoughts on getting air ride shocks and struts on a fox body mustang, would it make a big diff?

LX5liter · 06-02-2004, 09:46 PM

It would make as much difference as you wanted. You could adjust the ride height to where you like (keep in mind you will have to have your front end aligned at the ride height you plan on driving around at) and you could hang with the "Dropsicle" crowd!

. I thought about them, but I thought they were a little pricey.

stang_racer20 · 06-02-2004, 11:09 PM

Air Ride Technolgies right? Yeah I've still got them in mind. $1000 for a complete kit.

PowerSlideGT · 06-03-2004, 09:47 AM

Air shockes, bags, aka quarter panel killers, thows retarded things is what cause my 68 to crunch its quarter panel, some teen put them on, and one whent down.... i hate them

FiveOismylife · 06-03-2004, 10:51 AM

lol, if i was to hang out with the dropicle crowd i would be an offical tim hortons parking lot loofer. ya it was air technologies, and if its a $1000 for the kit for u americans then it would be about $1000000 + gst for us canadians, eh?

06-01-2004, 07:56 PM	#1
FiveOismylife Registered Member Join Date: May 2004 Location: Grande Prairie, AB Posts: 10	Air Ride What are your thoughts on getting air ride shocks and struts on a fox body mustang, would it make a big diff? __________________ tony

06-02-2004, 09:46 PM	#2
LX5liter dude5l Join Date: May 2001 Location: Grande Prairie, Alberta, Canada Posts: 603	It would make as much difference as you wanted. You could adjust the ride height to where you like (keep in mind you will have to have your front end aligned at the ride height you plan on driving around at) and you could hang with the "Dropsicle" crowd! . I thought about them, but I thought they were a little pricey. __________________ Good luck! Brad R. 1992 L.X. 5.0 coupe MODS: A few little bolt ons New Best time ...11.60 @ 128 mph @ 2000+ ft altitude. Rice Haters Club member #39 Users rides #2542

06-02-2004, 11:09 PM	#3
stang_racer20 Registered Member Join Date: Jun 2003 Location: Wisconsin Posts: 348	Air Ride Technolgies right? Yeah I've still got them in mind. $1000 for a complete kit. __________________ 92 Mustang GT, 347 Stroker(Forged Steel Crank/Rods-Balanced, Forged Aluminum Dished Pistons), Trick Flow Track Heat Intake, Trick Flow Twisted Wedge Heads w/ Stage 3 port/polish, 80mm C&L MAF, FMS 30# Inj., BBK AFPR, Trick Flow Stage 2 Cam, Trick Flow 1.6R Rockers, BBK E.L. Headers, Flowmaster Cat-Back, MAC CAI, FMS Pulleys, Griffin Alum. Radiator, MSD Pro-Billet Distributor; AOD, Dynamic 3300 Lockup Converter, B & M Super Cooler, B&M Ratchet Shifter; 3:73 gears.

06-03-2004, 09:47 AM	#4
PowerSlideGT Registered Member Join Date: Apr 2004 Location: Tecumseh Posts: 165	Air shockes, bags, aka quarter panel killers, thows retarded things is what cause my 68 to crunch its quarter panel, some teen put them on, and one whent down.... i hate them __________________ 1988 mustang gt t-top svo alum. Heads, comp cam rockers, e303 cam, Mass air, BBK cold air induction, BBK throttle body, gt-40 intake 1 inch spacer, Alum. drive shaft, world class 5 speed, 3.55 gear rear end, drag front springs.

06-03-2004, 10:51 AM	#5
FiveOismylife Registered Member Join Date: May 2004 Location: Grande Prairie, AB Posts: 10	lol, if i was to hang out with the dropicle crowd i would be an offical tim hortons parking lot loofer. ya it was air technologies, and if its a $1000 for the kit for u americans then it would be about $1000000 + gst for us canadians, eh? __________________ tony

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sept 11th Ride for Pride 2003 Vid	Kid_Roush	Blue Oval Lounge	0	01-06-2004 11:26 PM
ride with a ricer	7up	Stang Stories	14	04-25-2002 11:51 AM
Went for a ride in a Vette.	StoplightWarrior	Stang Stories	18	01-20-2002 08:46 AM
I took some stranger for a ride in the Fox	Fox Body	Blue Oval Lounge	10	01-17-2002 12:34 PM
lowering rear, how will it ride?	Drew1971	Classic Mustangs	1	05-13-2000 02:03 AM