D80E heads

bailey_57 · 07-08-2004, 09:02 PM

i found an add for these casting completely assembled heads. are they good or bad, want to run them with e303 cam, and fms cobra intake. they are advertised as 1.90 intake 1.60 exhaust

rwhite65 · 07-09-2004, 06:31 AM

What do you currently have?
Ryan

tireburner163 · 07-09-2004, 05:55 PM

They're junk smogger castings.

NO SLO PK · 07-09-2004, 10:49 PM

69cc chambers, 1.78/1.45 intake and exhaust valves. 1978-1980 vintage for the 302 and 351W.

You're wasting your time. Flow isn't as good as stock E7 castings, and the chambers are way to big.

Capri306 · 07-10-2004, 02:17 AM

I saw that ad as well flipping through the August issue of MM&FF while @ work today. I thought to myself, "you're KIDDING, right? Those castings aren't good enough for a doorstop already, and you're increasing the chambers to 69cc's??!?!" Pass this bad joke up. They're about as useful as a broken dick.

IMHO, the only factory castings worth anything are the E7TE and D0OE heads, of which I have sets of both.

bailey_57 · 07-11-2004, 11:39 AM

thanks man i think i'm gonna have my e7's ported to go with an e cam

07-08-2004, 09:02 PM	#1
bailey_57 Registered Member Join Date: Mar 2000 Location: Berwick,Pa Posts: 127	D80E heads i found an add for these casting completely assembled heads. are they good or bad, want to run them with e303 cam, and fms cobra intake. they are advertised as 1.90 intake 1.60 exhaust

07-09-2004, 06:31 AM	#2
rwhite65 Ride Hard Join Date: Oct 2000 Location: Wyoming IL Posts: 1,094	What do you currently have? Ryan __________________ 65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored

07-09-2004, 05:55 PM	#3
tireburner163 It's a lot like a race car Join Date: Aug 2000 Location: Meridian, MS Posts: 4,130	They're junk smogger castings. __________________ 1987 Buick T-type 1998 HD Electra Elide

07-09-2004, 10:49 PM	#4
NO SLO PK Registered Member Join Date: Mar 1999 Location: Arcadia, CA, USA Posts: 731	69cc chambers, 1.78/1.45 intake and exhaust valves. 1978-1980 vintage for the 302 and 351W. You're wasting your time. Flow isn't as good as stock E7 castings, and the chambers are way to big. __________________ Russ L '91 LX - 331 w/ Procharger '03 Cobra Convertible - Pullied '94 Lightning '65 Mustang Coupe

07-10-2004, 02:17 AM	#5
Capri306 Moderator Join Date: Sep 1998 Location: Grand Rapids, Michigan, USA Posts: 1,001	I saw that ad as well flipping through the August issue of MM&FF while @ work today. I thought to myself, "you're KIDDING, right? Those castings aren't good enough for a doorstop already, and you're increasing the chambers to 69cc's??!?!" Pass this bad joke up. They're about as useful as a broken dick. IMHO, the only factory castings worth anything are the E7TE and D0OE heads, of which I have sets of both. __________________ Capri306, Moderator The Mustang Works Online 1979 Mercury Capri 1987 5.0L Mustang LX Notchback 1993 5.8L Eddie Bauer Bronco

07-11-2004, 11:39 AM	#6
bailey_57 Registered Member Join Date: Mar 2000 Location: Berwick,Pa Posts: 127	d80e heads thanks man i think i'm gonna have my e7's ported to go with an e cam

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help I need heads!!	SmokinStangGT	Windsor Power	18	05-04-2003 10:05 PM
New FRP Heads for 96 - 98 4.6	surfbeast	Modular Madness	9	11-21-2002 07:02 PM
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads	slow98	Modular Madness	6	10-25-2002 04:28 PM
GT-40 heads	5.0 Pony	Windsor Power	1	09-10-2002 10:26 PM
Which heads are beter?	patman	Classic Mustangs	3	12-02-1999 03:42 AM