Typhoon Intake vs Edelbrock Performer RPM

lucheski · 07-11-2004, 12:11 AM

I just bought a Typhoon Intake. Its on its way... I have read over and over again that the Typhoon and the RPM are virtually the same. I want to know if I can use the phenolic spacer kit for an Edelbrock Performer RPM with the Typhoon.

Good Article on the Typhoon:
http://www.fordmuscle.com/archives/2...ke/index.shtml

1989 Grand Marquis 302 Block

Bored .030 over

Sterling Hypereutectic Pistons

1969 351W Heads (30 hours of hand porting)

60cc combustion chambers machined to 50cc

~10.5:1 Compression Ratio

Ford Racing F-303 Cam

Sealed Power Hardened Pushrods

Sealed Power Valve Springs

TRW Guideplates

Clevite Studs (For Roller Rockers)

Cloyes Double-Roller Timing Chain

Harland Sharp 1.6 Ratio Roller Rockers

A9L Mass Air Computer

70MM Cobra MAF

Chromed Cold Air Intake Kit

24lb/hr Fuel Injectors

3.55 Posi Rearend

Mac Equal-Length Shorties

Mac Off-Road H-Pipe with Flowmasters

3" Cowl Hood

sees · 07-13-2004, 12:54 PM

You should be able to... the typhoon is an exact copy of the edelbrock. Let me know what you think of it when you get it.

I want to buy the polished typhoon, just soon as I sell my cobra intake. But I heard the casting on them is not very good..?

07-11-2004, 12:11 AM	#1
lucheski Registered Member Join Date: May 2004 Location: Tennessee Posts: 21	Typhoon Intake vs Edelbrock Performer RPM I just bought a Typhoon Intake. Its on its way... I have read over and over again that the Typhoon and the RPM are virtually the same. I want to know if I can use the phenolic spacer kit for an Edelbrock Performer RPM with the Typhoon. Good Article on the Typhoon: http://www.fordmuscle.com/archives/2...ke/index.shtml 1989 Grand Marquis 302 Block Bored .030 over Sterling Hypereutectic Pistons 1969 351W Heads (30 hours of hand porting) 60cc combustion chambers machined to 50cc ~10.5:1 Compression Ratio Ford Racing F-303 Cam Sealed Power Hardened Pushrods Sealed Power Valve Springs TRW Guideplates Clevite Studs (For Roller Rockers) Cloyes Double-Roller Timing Chain Harland Sharp 1.6 Ratio Roller Rockers A9L Mass Air Computer 70MM Cobra MAF Chromed Cold Air Intake Kit 24lb/hr Fuel Injectors 3.55 Posi Rearend Mac Equal-Length Shorties Mac Off-Road H-Pipe with Flowmasters 3" Cowl Hood

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
typhoon vs edelbrock	stanger9219	Windsor Power	8	03-12-2004 03:35 PM
Performer VS. Performer RPM	IMPULSERACING	Windsor Power	8	02-09-2001 12:45 PM
Performer RPM vs. Track Heat which is better for my setup?	MY91GT	Windsor Power	0	01-19-2001 12:52 PM
does gt40 intake work with sn95?	daz95gt	Windsor Power	8	01-13-2001 08:20 AM
Performer RPM or Stealth	Dangerous Dave	Windsor Power	1	01-11-2001 11:45 PM

07-13-2004, 12:54 PM	#2
sees Registered Member Join Date: Jun 2004 Location: Los Angeles, CA Posts: 18	You should be able to... the typhoon is an exact copy of the edelbrock. Let me know what you think of it when you get it. I want to buy the polished typhoon, just soon as I sell my cobra intake. But I heard the casting on them is not very good..?