Stock Cam gonna cut it?

rwhite65 · 03-17-2005, 02:34 PM

ok, here is the deal. I am putting a fresh 306 91 h.o. in the fastback. The setup is a edelbrock RPM Manifold, 600 Holley Vac Secondaries, Mallery ignition and Distributor, 1.7 roller rockers, and a set of heavily ported, gasket matched....etc e7's. The e7's have new springs that are slightly stiffer then the stockers were. Car has full length headers to a 2.25 exhaust. Engine is bolted to an AOD, with a P.I. 2800 stall and 4.10 gears.

If I put the engine in as planned in the next month, I was gonna use the stock cam. I have seen lots of you guys saying not to do it, but I did not want to over cam this set-up. So, what cam should I run if not the stocker? I kinda want to keep the 1.7 rollers.
Ryan

Dark_5.0 · 03-17-2005, 04:12 PM

Stock cam with 1.7's is a perfect match with stock ported heads.

I think the stock cam will make you happy with that set-up.

rwhite65 · 03-17-2005, 07:00 PM

well glad to see my research may have been as accurate as I thought.
thanks for the help!
Ryan

03-17-2005, 02:34 PM	#1
rwhite65 Ride Hard Join Date: Oct 2000 Location: Wyoming IL Posts: 1,094	Stock Cam gonna cut it? ok, here is the deal. I am putting a fresh 306 91 h.o. in the fastback. The setup is a edelbrock RPM Manifold, 600 Holley Vac Secondaries, Mallery ignition and Distributor, 1.7 roller rockers, and a set of heavily ported, gasket matched....etc e7's. The e7's have new springs that are slightly stiffer then the stockers were. Car has full length headers to a 2.25 exhaust. Engine is bolted to an AOD, with a P.I. 2800 stall and 4.10 gears. If I put the engine in as planned in the next month, I was gonna use the stock cam. I have seen lots of you guys saying not to do it, but I did not want to over cam this set-up. So, what cam should I run if not the stocker? I kinda want to keep the 1.7 rollers. Ryan __________________ 65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored

03-17-2005, 04:12 PM	#2
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: Stock Cam gonna cut it? Stock cam with 1.7's is a perfect match with stock ported heads. I think the stock cam will make you happy with that set-up. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

03-17-2005, 07:00 PM	#3
rwhite65 Ride Hard Join Date: Oct 2000 Location: Wyoming IL Posts: 1,094	Re: Stock Cam gonna cut it? well glad to see my research may have been as accurate as I thought. thanks for the help! Ryan __________________ 65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is stock?	88workcar	Blue Oval Lounge	12	01-22-2003 09:06 PM
Stock Tire Sizes	GhettoPop	Windsor Power	8	01-19-2003 07:22 PM
AFR 165's or other heads with cam and stock induction	Mustang_GT_90	Windsor Power	27	11-25-2002 03:01 PM
Suspension ?--Bullitt, Eibach, Stock, or COMBO???	rel3rd	Windsor Power	3	10-15-2002 07:53 PM
LT's vs. shorties vs. stock headers	jonnyk	Windsor Power	9	01-01-2001 11:28 AM