![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Feb 2003
Location: ontario canada
Posts: 165
|
![]() hello everyone !!
i own a set of gt 40 p heads and wanted to know a little more about them before i do any machine work to them. do they have 1.6 rockers,do they have a 3 angle valve job on them from factory. thats all not much thanks oh ya and if there is anything else i should know about them thanks!!! |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Feb 2005
Posts: 13
|
![]() I believe most all 302's came with a 1/6 rocker on them, as far as the 3 angle valve job goes, I can't say for sure. If I had to guess I would say no, but that's only a guess. How old are these heads? If they have any miles on them I would reccomend a 3 angle valve job. Are you doing the machine work yourself? Good luck with everything. I believe those heads came on explorer's from the factory, but again I could be incorrect. I have been in and out of the mustang hobby since approx. 1995, but I thought I read that somewhere one time. Take care.
|
![]() |
![]() |
![]() |
#3 |
Ride Hard
Join Date: Oct 2000
Location: Wyoming IL
Posts: 1,094
|
![]() They did come on explorers and you are gonna need headers designed for those heads. Some guys have gotten by with headers that were not made for the GT-40p head, but I do not know what headers those were. I believe those headers had to be dented here and there.
Ryan
__________________
65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Feb 2003
Location: ontario canada
Posts: 165
|
![]() ya they came off a 96 or something explorer.
i got my long tubes to fix i just dented them a bit. so u guys think i should get the 3 angle, what about shaving them my stock heads have ben shaved and it helped out a lot. none of this is being done by myself by a local shop thanks mike |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
is there a visual diff. between the stock e7 and gt 40 iron heads | 93calcobra | Windsor Power | 3 | 11-05-2002 09:58 AM |
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads | slow98 | Modular Madness | 6 | 10-25-2002 04:28 PM |
351W heads on 289? | 66 Racer | Classic Mustangs | 4 | 10-18-2001 03:12 AM |
How about GT-40 heads? | SlowStang2 | Windsor Power | 3 | 07-03-2001 02:02 PM |
is there any difference between 351C heads and 351M heads | tireburner163 | Windsor Power | 7 | 03-09-2001 09:26 PM |