The easiest way to get to 350-375 rwhp

Jason2525 · 06-02-2005, 09:33 PM

I have a 94 mustang gt aode that is all stock except for an h pipe, flowmasters, and a K&N. It has 120,000 miles on it. What is the easiest, cheapest, and most reliable way to get 350-375 rwhp? I do not have a lot of money, and this car is my daily driver, but I do want something that is going to spank any ricer that pulls up next to me.

Ieatcamaros · 06-02-2005, 09:43 PM

There is no cheap and easy way to get 375 RWHP that will be reliable on a 120,000 mile car. You could put nitrous on it, but when you blow the motor, you have cost yourself a lot of dough. Besides, who wants to keep refilling a bottle. All you need is a good set of 70/30 struts (more streetable than 90/10s). You also need to upgrade your ring and pinion to at least 3.73. Add some good lower control arms to the mix and you'd be surprised what your car will do. All that will cost you about $5-600. You're looking at twice that much if you don't do any of the work yourself. BTW, with just the gear change, you'll be smoking most of the ricers that pull up to next to you.

To me, a supercharger sounds like what you really want, but you're looking at $3000 for that.

Jason2525 · 06-02-2005, 09:46 PM

the last thing i want is nitrous, before i supercharge it i should probaly rebuild my engine though

NOTCH306 · 06-03-2005, 05:27 AM

supercharger or turbo

06-02-2005, 09:33 PM	#1
Jason2525 Registered Member Join Date: Jun 2005 Posts: 22	The easiest way to get to 350-375 rwhp I have a 94 mustang gt aode that is all stock except for an h pipe, flowmasters, and a K&N. It has 120,000 miles on it. What is the easiest, cheapest, and most reliable way to get 350-375 rwhp? I do not have a lot of money, and this car is my daily driver, but I do want something that is going to spank any ricer that pulls up next to me.

06-02-2005, 09:43 PM	#2
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	Re: The easiest way to get to 350-375 rwhp There is no cheap and easy way to get 375 RWHP that will be reliable on a 120,000 mile car. You could put nitrous on it, but when you blow the motor, you have cost yourself a lot of dough. Besides, who wants to keep refilling a bottle. All you need is a good set of 70/30 struts (more streetable than 90/10s). You also need to upgrade your ring and pinion to at least 3.73. Add some good lower control arms to the mix and you'd be surprised what your car will do. All that will cost you about $5-600. You're looking at twice that much if you don't do any of the work yourself. BTW, with just the gear change, you'll be smoking most of the ricers that pull up to next to you. To me, a supercharger sounds like what you really want, but you're looking at $3000 for that. __________________ The sig says it all.

06-02-2005, 09:46 PM	#3
Jason2525 Registered Member Join Date: Jun 2005 Posts: 22	Re: The easiest way to get to 350-375 rwhp the last thing i want is nitrous, before i supercharge it i should probaly rebuild my engine though

06-03-2005, 05:27 AM	#4
NOTCH306 Registered Member Join Date: May 2005 Location: York, PA Posts: 46	Re: The easiest way to get to 350-375 rwhp supercharger or turbo __________________ 1990 Notch, 306, T-56 trans, 3:73 gears, zex 100 shot, gt-40,z-303 cam, roush 200 heads, powerdyne on the way

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dyno'd my Stock '03 Cobra - 386 RWHP	NO SLO PK	Modular Madness	9	05-05-2003 08:54 PM
New 5.0 coming - Est. RWHP	B2r3y	Windsor Power	13	02-26-2003 05:10 PM
03 Cobra makes 400 rwhp and runs 11's!!	Stang_Crazy	Blue Oval Lounge	15	07-15-2002 08:42 AM
Stock RWHP on 94 GT?	Whoapony94	Windsor Power	11	04-08-2002 03:15 PM
Is 209 rwhp Ok for my mods?	GTLee	Windsor Power	14	08-13-2001 10:25 AM