Questions reguarding the SC-Trim blower...

leathal injection · 06-13-2005, 10:34 PM

whats up guys, i posted in the Power Adders forum, but it seems like there not much action going on in that section..

i just bought an sc trim blower. i heard these blowers at 5psi give around 60-70hp on a stock 5.0L.

My question is will i see more of a horse power gain from the blower with my heads and intake combo? im running a gt40 intake with afr 185s. if so, what kinda of a power gain should i expect with 5psi... ??

also i have a 10.5:1 comp. motor with 24# injectors and a 255lph in my tank, how much boost can i get away with with my sc-trim?

USMC302 · 06-16-2005, 12:27 PM

You plan on using the spray while boosted? If so, I say you are running too much compression for safe usage. To answer your question though, yes you will see more of a gain with current mods.

Dark_5.0 · 06-17-2005, 01:14 PM

That blower is too small for your set-up. Probably would only make 3psi with the 5# pulley on that motor.

06-13-2005, 10:34 PM	#1
leathal injection Registered Member Join Date: Mar 2004 Location: Long Island Posts: 58	Questions reguarding the SC-Trim blower... whats up guys, i posted in the Power Adders forum, but it seems like there not much action going on in that section.. i just bought an sc trim blower. i heard these blowers at 5psi give around 60-70hp on a stock 5.0L. My question is will i see more of a horse power gain from the blower with my heads and intake combo? im running a gt40 intake with afr 185s. if so, what kinda of a power gain should i expect with 5psi... ?? also i have a 10.5:1 comp. motor with 24# injectors and a 255lph in my tank, how much boost can i get away with with my sc-trim? __________________ 1990 Mustang GT Engine- 308 (bored .40 over) Probe Forged pistons (10.5:1), Scat forged crank and rods, w/Main Girdle, AFR 185 heads, GT-40 intake, CSI electric water pump. AC delete kit, No smog pump, Manual rack and pinion steering. Ignition- MSD 6AL, MSD Blaster coil, MSD hellicore wires. Drive Train- Tremic 3550, Alum. Drive shaft, 3:73 gears, Stock carrier and axels. 26X11.5 M/T Et streets. Power adder- 175 shot of laughing gas. Best ET 11.5 @120mph on squeeze, 12.4 @109mph on muscle (on gt40 heads) on the 185 heads ... ??? tba

06-16-2005, 12:27 PM	#2
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: Questions reguarding the SC-Trim blower... You plan on using the spray while boosted? If so, I say you are running too much compression for safe usage. To answer your question though, yes you will see more of a gain with current mods. __________________

06-17-2005, 01:14 PM	#3
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: Questions reguarding the SC-Trim blower... That blower is too small for your set-up. Probably would only make 3psi with the 5# pulley on that motor. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Questions about Alky/Water injection with a positive displacement blower	stangsrule	Power Adders	0	07-22-2003 12:58 PM
ys trim on a 95gt????? WTF	sn95gt19	Windsor Power	1	02-25-2003 09:09 PM
Have questions about your blower? J.R. Granatelli attending chat tonight!	88COBRA	Windsor Power	0	02-12-2003 11:59 AM
Looking to get a blower. Have a few questions.	bigred90gt	Windsor Power	2	01-10-2003 09:50 PM
blower questions powerdyne, vortech	smokedchevy	Windsor Power	3	03-31-2001 08:50 PM