© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
10-01-2005, 02:18 AM | #1 |
Registered Member
Join Date: Sep 2005
Location: birmingham,AL
Posts: 20
|
87-93 front end on 84 gt
how hard is it to change out the front bumpers and if i change them out can i just buy the 6 piece kit off of ebay and just make a wiring harness??? my grandpa is a bucket truck electrician and a wiring harness would be no prblem so how hard is it to change out the fornt ends
|
10-02-2005, 02:07 AM | #2 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
Re: 87-93 front end on 84 gt
If you want the complete front end clip from an 87-93 mustang on your '84GT then you will also need the 87-93 hood.
I don't know about the wiring kit you're talking about but I know it can and has been done before.
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
10-02-2005, 07:56 PM | #3 |
Rat Killer
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
|
Re: 87-93 front end on 84 gt
Look at my sig. That there's a 1985 LX, with a '93 nose/hood.
No wiring harness, just have to change the plugs for the "newer style" bulbs is all. HAVE to change the hood, headlights, frontend, and MOST importantly....... Fender kickers! The newer noses are wider than the 80's models, and Ford actually built little kickers that bolt on the bottom fender in front of the wheel. That way, ALL the fenders are the same, just add the little kickers so the body line matches the new wider nose.
__________________
d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply..... |
10-02-2005, 08:02 PM | #4 |
Registered Member
Join Date: May 2002
Location: Tampa,FLORIDA
Posts: 340
|
Re: 87-93 front end on 84 gt
yeah, those are called fender extensions. Also remember the mouldings will be different style so the bumper cover moulding wont match your body moulding exactly as far as looks go.
__________________
5.0, Holley heads, 1.7 Scorp Rockers, Stealth intake, Holley 600 carb, Holley Mech. Fuel pump, MSD 6Digital, MSD distributor, Hotchkis upper/lower rear control arms, FMS B Springs, 3:73 (8.8) rear. Production # 9,377 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2001 GT goes down, so does modded WRX. | *Steeda90GT* | Stang Stories | 4 | 09-04-2002 02:05 PM |
Good Buy or not, 90 gt $3000 | zepherman | Blue Oval Lounge | 5 | 08-30-2001 07:52 PM |
Rear end gears on 90 GT? | 00'BlackSteed | Windsor Power | 4 | 08-02-2001 12:57 PM |
GT and LS-1 get into Tangle. GT WINS!! | Mercury | Stang Stories | 8 | 06-26-2001 12:49 PM |
Need new front tires... suggestions... | FivepointOH | Windsor Power | 4 | 01-01-2001 11:20 PM |