Linear Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
10-26-2005, 08:06 AM
|
#1 |
|
Registered Member
Join Date: Sep 2000
Location: valley cottage, ny, usa
Posts: 4
|
302 to 351
hello i have a question, i am new to mustangs. if i chang my 302 from my 91 gt and put in a 351w how can i keep it EFI, what do i have to do?
|
|
|
|
10-27-2005, 02:57 PM
|
#2 |
|
Certified Stang Nut
Join Date: Jul 2005
Location: Pompano Beach, Fla.
Posts: 7
|
Re: 302 to 351
Yes. Edelbrock and Trickflow both have 351 lowers available for their intakes.
Have fun with the accessory brackets. 
__________________
Born and raised in the Motor City |
|
|
|
|
10-27-2005, 04:34 PM
|
#3 |
|
Registered Member
Join Date: Sep 2000
Location: valley cottage, ny, usa
Posts: 4
|
Re: 302 to 351
thanks, and as far as the EFI i don't have to make any changes?
|
|
|
|
|
10-28-2005, 01:43 AM
|
#4 |
|
Registered Member
Join Date: Sep 2005
Posts: 41
|
Re: 302 to 351
Do a search on this site for 351 swap, you will find a great article by Marty Kot that goes over soup to nuts everything needed to swap a 351 and keep EFI, I did it myself, everything he says is accurate and it even gives all the part numbers. His article will explain everything you need to do. Good luck.
__________________
88 Lx project. 96 Z28 daily driver. |
|
|
|
|
10-28-2005, 05:09 AM
|
#5 |
|
Registered Member
Join Date: Sep 2000
Location: valley cottage, ny, usa
Posts: 4
|
Re: 302 to 351
cool, thanks a lot
|
|
|
|
 |
|
|