© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
05-18-2005, 06:55 PM | #21 |
Rat Killer
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
|
Re: "Temporary" engine
DYNAMIC compression is guestimated at 11.43:1 Static is up around 13.2:1 so I see what you mean there.
Ran some tests on my desktop dyno, and with 1.7 rockers, and the cam retarted 4* is when it made the best power. 579HP at 7000. With the 1.6 rockers, and the cam at 0*, it's making 573HP at 7000. So Me thinks due to the close tolerances on those pistons, and we're only talking about 6 HP, I'm gonna go straight up on the cam, and 1.6 rockers. Sound logical? Here she is all "mocked" up:
__________________
d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply..... Last edited by ~The Jester~; 05-18-2005 at 09:03 PM.. |
05-20-2005, 07:51 AM | #22 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
Re: "Temporary" engine
Good luck with the engine from a fellow canfield fan.
I beat everyone else with a stock block regardless of what heads they are running AFR 185's Trick Flows it doesnt matter. The air gets as bad as 6400FT here where I am at and I still go 106mph. I would be going 110-112mph at sea level in a full weight car and I weigh 220 lbs. I couldnt be happier with my Canfields.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
05-21-2005, 09:26 PM | #23 |
Rat Killer
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
|
Re: "Temporary" engine
These are even 1-off Canfield heads. This is the first casting of the new design for the 215 heads, should be bad-azz.
USED to be friends with the owner, but we had a falling out. LOOOOONG story. So my new bad-azz Canfield heads will probably be sporting a set of TRICK FLOW valve covers! <WEG>
__________________
d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply..... |
06-25-2005, 02:38 PM | #24 |
Rat Killer
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
|
Re: "Temporary" engine
It's Alive! Fired her up today, and I gotta admit, she sounds pretty pissed off. I went with the 1.7 rockers, and the cam straight up at zero. She gets hot REALLY fast, so I have to deal with that, but other than that... Woo Hoo!!! If it runs as good as it sounds, it might just become a "temporarily permanent" engine. hehehehhe
Here's a crappy phone pic: http://www.knights-rule.com/images/347.jpg
__________________
d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply..... |
06-25-2005, 05:01 PM | #25 |
Registered Member
Join Date: Jun 2005
Posts: 8
|
Re: "Temporary" engine
I built a 410 stroker in a clevland block. 4 inch stroke, 6inch rod, talk about the oil ring being in the wrist pin. never had a broblem. go for it
|
11-02-2005, 06:08 PM | #26 |
Rat Killer
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
|
Re: "Temporary" engine
Just reading some old threads and I had to comment on this one!
Thanks to YOU guys, I do believe this "temporary" engine found a permanent home, and is alive and WELL!!!! I NEVER would have done this without this forum, just something I wouldn't have even thought about. At 11.061 @ 123.21 MPH N/A, I'm glad I let you all talk me into it. THANKS!!!!!!!!!!!
__________________
d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply..... |
11-03-2005, 12:47 AM | #27 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
Re: "Temporary" engine
AHHH...HAAA......so that's your cam specs....LOL
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
11-03-2005, 02:43 PM | #28 |
Rat Killer
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
|
Re: "Temporary" engine
I still have that cam, the 544/548 one. It did REALLY well on my 302.
That's not the specs for "Mr. Nasty" though. hehehehehe
__________________
d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply..... |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rare Mustangs....Got One? | 1969Mach1 | Blue Oval Lounge | 22 | 09-25-2010 04:59 AM |
Very bad experience with Engine Dynamics of San Jose CA | JAGraff | Classic Mustangs | 8 | 06-16-2005 11:43 AM |
Very bad experience with Engine Dynamics of San Jose CA | JAGraff | Small Ponies | 0 | 05-12-1999 02:27 AM |
Very bad experience with Engine Dynamics of San Jose CA | JAGraff | Racer's Club House | 0 | 05-12-1999 02:27 AM |