© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
01-28-2006, 03:07 PM | #1 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
Is a nitrous bottle warmer needed in the summer?
Is a nitrous bottle warmer needed in the summer months, when it's hot out, or are they only for during the fall months when it's a little cooler outside.
I know their purpose is to keep bottle pressure at/around 900-950psi but was wondering if a warmer is need when it's hot oustide.
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
01-28-2006, 06:35 PM | #2 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
Re: Is a nitrous bottle warmer needed in the summer?
when its about 100degrees outside, then no you don't need it, BUT I highly recommend using one for when the temp fluctuates. Make sure you get one that has a pressure sensitive cut-off switch, and not one that is just temperature based.
__________________
NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft |
01-28-2006, 07:30 PM | #3 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
Re: Is a nitrous bottle warmer needed in the summer?
How much current does a bottle warmer use?
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
01-28-2006, 08:09 PM | #4 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
Re: Is a nitrous bottle warmer needed in the summer?
I really don't know, but it's probably a decent amount. I see you have a powermaster alt, so you should be fine.
__________________
NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft |
01-29-2006, 04:47 AM | #5 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
Re: Is a nitrous bottle warmer needed in the summer?
Yeah, but it's only 100 amps. That's why I asked because I was considering going to a 140 amp if the current was high.
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
02-20-2006, 03:10 AM | #6 |
Registered Member
Join Date: May 2000
Location: TX
Posts: 18
|
Re: Is a nitrous bottle warmer needed in the summer?
Yeah get one... Because once your bottle loses mass.... ya know u use some of it.. the pressures gonna decrease so u need to heat it up a lil to get the pressure back up.... wont have to refill so soon either =].
__________________
89 GT, flows, gutted cats, headers, 2.5" tailpipes, CAI, 3.73s, 80hp shot, 190 FP, Holley Ignition w/ coil, ASP Pulleys. |
02-20-2006, 06:11 PM | #7 | |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
Re: Is a nitrous bottle warmer needed in the summer?
Quote:
Bottle pressure is dictated by bottle temperature. The warmer the bottle...the more pressure. The colder the bottle...the less pressure.
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Nitrous cutting out | Simi Stang | Power Adders | 11 | 05-11-2005 03:19 PM |
adjusting bottle warmer | Simi Stang | Power Adders | 1 | 04-29-2005 10:29 AM |
n2o...what do i need? | Coupe50h | Power Adders | 4 | 01-20-2005 04:35 PM |
How to test for leaks with nitrous bottle? Any recalls on bottles? | 1jimmy__d | Windsor Power | 12 | 10-11-2002 07:17 AM |
problems installing nitrous bottle in trunk? | coolguy620 | Windsor Power | 2 | 06-29-2002 08:20 PM |