© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
04-05-2006, 12:35 AM | #1 |
Ride Hard
Join Date: Oct 2000
Location: Wyoming IL
Posts: 1,094
|
Routing electric fuel pumps
I am sure some of you have been reading how I have ended up wrenching on a 408w equipped 91 lx. Here is the deal.
The owner (my buddy) decided last winter he wanted to run an electric fuel pump to the carbed motor, which is where the black Holley fuel pump comes in. Then he decided he was going to run a dedicated fuel line for the nitrous shot (later to be used), this is where the Holley blue pump comes in. Now here are two big questions and since I prefer mechanical pumps....I need some help. Since the car is now carbed and has a rear sump fuel tank, we have the two lines. The regular fuel line is there along with the fuel injected pressure return line. Is there any reason why we can not use the old return line as the dedicated nitrous line for the Blue Holley pump? Someone tried to tell my buddy the two pumps sucking that close together would starve one of the lines. I find this hard to believe, but again, this is a new area to me. Second, when he routes the lines and pumps from the rear sump tank, we want to avoid having the electric fuel pumps sticking down where they can be seen below the rear bumper line. Where has everyone else ran their lines? There has to be a way to hide them. We considered mounting them in the rear spare tire well, but then we are introducing fuel to the passenger compartment in a way and that would also put the pumps above the tank, which I can’t see as being good for performance. Some say we need to mount a small fuel cell in the engine compartment for the nitrous line, but we hate that idea. His engine compartment is rather clean and orderly, and the idea of a fuel cell up there is not appealing. Thanks guys, Ryan
__________________
65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored |
04-05-2006, 07:39 PM | #2 |
Registered Member
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
|
Re: Routing electric fuel pumps
Holley suggests mounting the pump on the inside of the frame rail at the same level or below the bottom of the fuel tank and as close to the tank as possible.
Now, having said that, I have to admit that I have mine mounted along with a large inline filter inside the trunk about an inch higher than the top of the tank (the trunk floor). Ive run it this way for years now without a problem. I realize that this is not the safest place for it but have been too lazy (or stupid) to relocate it to the inside of the frame rail under the car where it really belongs. Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe |
04-05-2006, 08:52 PM | #3 |
Ride Hard
Join Date: Oct 2000
Location: Wyoming IL
Posts: 1,094
|
Re: Routing electric fuel pumps
I will have to look, but I think his exhaust runs pretty close to that frame rail. That exhaust is being pulled for some dumps, so maybe it will work. Guess I will look and see.
Ryan
__________________
65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Electric fuel pump longevity? | Rev | Windsor Power | 7 | 01-03-2006 12:45 AM |
Fuel Pump electric??? | bigdaddy999 | Windsor Power | 1 | 08-17-2005 06:10 PM |
Electric fuel pump mounting | tommyinla | Classic Mustangs | 8 | 05-29-2003 02:50 PM |
Fuel Pumps | COUSIN ROB | Modular Madness | 2 | 07-09-2002 09:11 AM |
Electric Fuel Pressure Gauge HELP!! | quick89gt | Windsor Power | 3 | 03-13-2001 10:36 AM |