![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
![]() After pulling my tranny down and installing my new Edge converter, I'm having trouble getting the tranny to mount back up to the engine.
I'm doing this project on the ground, which makes it much harder already. I can get it within an inch of the engine but I just can't seem to snug it up the rest of the way. All the bolt holes seems to be inline so far. I also made sure the converter was seated properly against the pump. Why won't it go together
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
![]() |
![]() |
![]() |
#2 |
Ride Hard
Join Date: Oct 2000
Location: Wyoming IL
Posts: 1,094
|
![]() Ok, I am going to list some of the things that I have had issues with before, see if maybe any of these could be you.
Even if you did not have the TC all the way seated to the pump, the transmission would more then likely come close to bolting to the motor, but the TC would be pinched between the flywheel and transmission. Are the TC studs properly going thru the flex plate? My new Ebay flex plate this year had one hole that needed a little "massaging" to get the TC studs to all come thru the flex plate freely. Those few threads catching on that hole held me up. If your studs are coming thru nicely, then something has to be catching it. But my get is the TC studs are not perfectly fitting your flex plate. Here is another thing I have done while installing my autos. When you have the studs of the TC pushed thru the flex plate, grab one of those studs, and wiggle it clockwise and counter clockwise. It should move freely back and forth and make a nice little "ting" noise on the flex plate. If not, something is binding. As I say all this, then think about a c-6 I messed with last summer. It may have had bolts that screwed into the TC vs. studs mounted in the TC. If this is the case with you, I am not really sure what it would be. Is the hub on the front of your TC too big to go into the flex plate? Just grasping here now….. Also, make sure you put that aluminum shield in there between the flex plate and the engine. I have forgotten that a time or two ![]() Let us know, Ryan
__________________
65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored |
![]() |
![]() |
![]() |
#3 |
Moderator
Join Date: Aug 2000
Location: Milan, OH
Posts: 2,699
|
![]() Don't force it (i.e. use the bellhousing bolts to pull it in). Take the trans back down and make sure that you've got the converter fully engaged. You'll have to line up two set of splines plus the pump support to get the converter all the way in. It can be frustrating, but keep working the converter and it should go in.
Lay your two converters side by side and make measurements all all engagement points, internal and external to make sure you've got a correct converter. Lastly, after you do get it installed, make sure you've got about 1/8" free play between the converter and flexplate to ensure you don't bind the pump or wipe out your engine thrust.
__________________
Jeff Chambers 1990 Mustang GT 10.032 Seconds / 137.5 MPH 14-time Street Warrior World Record Setter CRT Performance 2001 Tropic Green Mustang GT - 12.181 / 113.2 MPH 2002 Ford F-250 Crew Cab 7.3l Power Stroke - 17.41@77.2 "There's nothing boring about a small block automatic shifting gears at 9400 rpm!" |
![]() |
![]() |
![]() |
#4 |
Moderator
Join Date: Aug 2000
Location: Milan, OH
Posts: 2,699
|
![]() My bad, you've go a C-4. You'll only have on set of splines to engage. I was thinking AOD where you've got the direct shaft too.
__________________
Jeff Chambers 1990 Mustang GT 10.032 Seconds / 137.5 MPH 14-time Street Warrior World Record Setter CRT Performance 2001 Tropic Green Mustang GT - 12.181 / 113.2 MPH 2002 Ford F-250 Crew Cab 7.3l Power Stroke - 17.41@77.2 "There's nothing boring about a small block automatic shifting gears at 9400 rpm!" |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Sep 1998
Location: Oviedo, FL
Posts: 992
|
![]() Don't forget to check the nose of the convertor where it goes in the back of the crankshaft. Make sure it fits there.
Also, C-4 does have two sets of splines. Front pump and input shaft. AOD had three.
__________________
"Support our Troops" Dave 1968 Cougar 2004 Thunderbird 2007 F150 Harley-Davidson, SuperCrew 1986 LTD 1997 Ranger 1992 Honda Civic |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
tranny swap? | 03stangGT | Modular Madness | 7 | 11-19-2006 08:57 AM |
Anyone running a C-4 tranny I need HELP!!!!!!!! | mattcstang | Racer's Club House | 5 | 09-07-2006 11:43 PM |
Yet another tranny fluid ?? | Simi Stang | Windsor Power | 4 | 09-30-2003 12:44 PM |
Tranny update...Lentech VB | silver_pilate | Blue Oval Lounge | 10 | 05-02-2002 12:34 PM |
This is bad! Did my Uncle cause my Racing tranny to overheat?(It's a long 1... sorry) | Stang_ROTY | Windsor Power | 1 | 08-30-2001 10:55 PM |